Ask the Car People.SM


Ford Bronco Problems

350 messages,  Last post on Jul 05, 2009 at 8:53 PM

You are in the Ford Bronco Forum.

What is this discussion about? Ford Bronco

Messages Page 2 of 36

#8 of 350 1991 Bronco by qftball

Mar 22, 2006 (11:45 pm)

I have a 1991 ford Bronco one day while driving down the road it started leakin transmission fluid we pulled over and noticed it was a stream sort of like when you change your oil we checked the plugs but it seemed to be coming from the end where the engine and the trans. meet ive had two mechanics look at it and one said it was just the O rings and that they just need to be replaced and the trans. needs to be resealed but the other said it was the pump, but it hasnt leaked since and it shifts and drives just fine. Can any one Help or suggest what it might be? thanx

#9 of 350 Re: 1991 Bronco [qftball] by dubbayoudot

Apr 11, 2006 (8:22 pm)

Replying to: qftball (Mar 22, 2006 11:45 pm)
I am having the same exact problem, and I was wondering if you got the o-rings replaced. I would really appreciate any advice you might have. Thanks.

#10 of 350 Re: Speedo sensor [94eddyb] by chev72

May 19, 2006 (5:48 pm)

Replying to: 94eddyb (Feb 18, 2006 10:36 am)
hey joe ..I have a 94 5.8 bronco with exactly the same problem. I was wondering if you have found out anything more about the problem.I was going to replace the rear dif sensor but not now since it did not work on yours. THANKS ..JEFF

#11 of 350 96 ford bronco trans questions? ......... by angausshar4

May 27, 2006 (7:56 pm)

I have a 1996 ford bronco 4*4 eddie baurer eddition and I'm havin problems w/ my trans........I can drive it for about 15-20 miles and then it starts pumping fluid out of the the tranny. then after it cools off for a while it will stop leaking and i put more fluid in, its ready for another 15-20 miles. what do you think could be the problem?

#12 of 350 87 bronco full-size 351 Winsor by broncosnake

May 31, 2006 (7:10 pm)

Any body out there own a 87 with a 351 windsor, 4 barrel carb and c-6 tranny that came stock. i need info on setting up vacuum,to egr,exhaust control valve, intake heat control valve and charcoal canister for fuel tank and carb vapors and how it all works. any info will be appreciated. thanks, broncosnake87

#13 of 350 bronco chat rooms? by broncosnake

May 31, 2006 (8:23 pm)

Anybody know of any chat rooms or other forums that I could get info on 87 broncos?

#14 of 350 1990 Bronc 5.0 by 90bronc

Jun 05, 2006 (10:30 pm)

Driving home the other day the 'tin bitch' died. After getting it towed home we discovered no spark. There is power going to the coil but NO power out of the coil. We changed coils and still no spark...any ideas?

#15 of 350 Re: Ford Bronco Problems [93ebfbronco] by 90bronc

Jun 05, 2006 (10:32 pm)

Replying to: 93ebfbronco (Jan 04, 2006 5:18 pm)
I had a vibration in the rear of my Bronc....turned out to be the U joints....u have 4X4? check the joints

#16 of 350 Re: 1991 Bronco [dubbayoudot] by qftball

Jun 06, 2006 (9:05 pm)

Replying to: dubbayoudot (Apr 11, 2006 8:22 pm)
they told me that i needed to replace the o rings but no one will replace just one they want to do them alll for like 500 bucks what so i just bought Lucas transmission seal from the auto parts store and it lubricated the seal enough that it has never leaked again .

#17 of 350 TFI by 90bronc

Jun 10, 2006 (10:19 am)

ANyone know what tool I need to remove the TFI from a 90 302?...I tried everything and can't get a tool that fits..is it a 7/32 socket? my sockets are too short...help pls!

Messages Page 2 of 36

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement