Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Ford Bronco Ford Bronco Problems
228 messages, Last post on Nov 10, 2009 at 11:38 AM
You are in the Ford Bronco Forum. Your Hosts are steve_ & tidester
| i ran it without exhaust mostly idoling for about 10 mints and it started to run ruff...i put on an exhaust and it still ran bad...it makes a popping noise on the left side of the motor not quite a back fire but like it's a dead miss...it does it when i give it gas to...like it's gettin choked out on 1 cylander...i think it might be a burnt valve but would like more opinions | |
|
|
94 Bronco 143K never any major problems, All of a sudden has a problem getting it started. Acted like it didn't want to start but after holding the gas pedal down it come to a shaky start.  After getting it going act like it wont acclerate, shakes almost like it getting no gas. That day began to run fine no more problems after driving around for about five minutes. Now it hard to start and has problem accelerating. It will only accelerate very very slowly then almost bog down if I press the gas down hard at all? I think it is some kind of fuel problem please help?
|
|
|
|
|
I OWN A 1984 FORD BRONCO AND I'M TRYING TO FIND LEGAL EXHAUST SYSTEM WITH HEADERS. I FOUND A LOT OF PLACES THAT SELL HEADERS THAT ARE NOT STREET LEGAL.EVERY PLACE THAT I CALLED SAY THAT NOBODY MAKES THEM. PLEASE HELP ME! |
|
|
Hi, need help in South Africa. We own a 1993 Ford Bronco. The electronic speedo has started giving problems. It sometimes works and then not. I have spoken to a couple of auto electricians here but they do not have an idea how to fix it, any suggestions? Have to do quite a far trip with it soon and really do have to fix it. PLEASE HELP! |
|
|
I'm having a lot of trouble putting together my E4OD from my '93 Bronco. Everything checks out and is put together right, but everytime I bolt in the front pump, the whole works locks up and won't turnover. It would seem that something must be up too high, but I can find nothing wrong. Has anyone else had this trouble? What am I doing wrong?
|
|
|
Replying to: 94broncohause (Mar 29, 2009 6:46 am) |
|
| I would like to know the resistance specs on the coolant sensor for a 93 Bronco 5.8L. Can anyone answer? | |
|
SETER, For the Engine Coolant Temperature Sensor (ECT) - Not the coolant sensor for the TEMPERATURE Gauge... See Ryan's Info & Specs http://fordfuelinjection.com/index.php?p=28 ----------- Ford part Number; in Vehicle Emission Control Information (VECI) for 88 and up, PUK (49 States) Decal, PGP (Canada) Decal, Vacuum Diagrams & Calibration Parts List for 88 & UP - if hot Link does not take you direct; CLICK Quick Guides Scroll to bottom; Provides Vehicle Emission Control Information (VECI) and a related calibration parts list. Enter applicable info (need to know your Calibration number from your B-pillar sticker) Source: by Ford motorcraftservice.com http://www.motorcraftservice.com/vdirs/retail/default.asp?pageid=&gutsid= see my broncolinks.com site for more ECT LINKS incl. location/troubleshooting, DTCs etc. Hopefully the Admin won't delete this reply because I posted my site's URL, but there is no way I'd use a lot of bandwidth here to list all possible ECT Info. be well! Al
|
|
|
Replying to: miesk5 (Jul 17, 2009 9:07 am) |
|
You are here:
Forums
SUVs Ford Bronco Ford Bronco Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
1996 Ford Bronco
Browse by Board
Browse by Topic
