Sign In Join 



Ford Bronco Problems

231 messages,  Last post on Nov 21, 2009 at 2:24 AM

You are in the Ford Bronco Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Bronco


Messages Page 21 of 24
1
...
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion

#194 of 231
Re: P.O.S 2 things [jutmac] by jutmac
Feb 06, 2009 (12:52 pm)
Reply

Replying to: jutmac (Feb 04, 2009 12:54 pm)

It is not the computer mod. Checked the rotor, and every thing else and still wont start. HAS GAS> Has fire and gas flow just wont start. It almost turned over and caught today twice but once again it just turns over without catching.
I am lost. Ether wont even catch it. Should i just set fire to it??
Any other possibilities that one might try??
 
thanks
#195 of 231
It runs now by jutmac
Feb 07, 2009 (9:52 am)
Reply
Red Raider,
 I took all the spark plugs and cleaned them. It started up with a little ether. It runs a little rough though. Why is the MSD parts so expesive. Is there a cheaper alternative to changing all the parts out that you suggested?
 It also has that shudder, herkey jerkey around the time it shifts. Is that fixable. It is around 20 to 50 mph. If i gun it, it takes off fine but when I let off the gas a little it starts to shudder until i give it a steady flow of gas.
HMMMMMM
 
Jutmac
#196 of 231
Re: It runs now [jutmac] by redraider28
Feb 07, 2009 (2:31 pm)
Reply

Replying to: jutmac (Feb 07, 2009 9:52 am)

JUTMAC,
 
Another alternative to MSD would be ACCEL, or you can go back with stock MOTORCRAFT parts. I would change the plugs, wires, coil, and dist. cap and rotor for starters. I prefer MSD for their high-end performance, but whatever you choose, all those parts should be new.
 
I'm only a shadetree mechanic, but I've had a car that jerked before and I thought it was my transmission. Turned out to be a cracked spark plug......who would've thunk it?
 
Remember, just because you're getting SOME spark, doesn't always mean you're getting ENOUGH spark. Stock coils put out about 38,000V....the MSD puts out 48,000V.
 
Hope this helps.
#197 of 231
Roaring Engine by CalExplorer
Feb 18, 2009 (11:29 am)
Reply
I have a 94 Bronco 5.8 lit, When i turn the vehicle on the engine roars at idle like it was in a full out drag race RPM's way up at idle. Once I put it drive the engine slowa itself back down, but at stop signs it revs right back up. Any suggestions? The "Check Enigne" light is not on... Help
#198 of 231
Re: Roaring Engine [CalExplorer] by 89blackntan
Feb 18, 2009 (11:50 am)
Reply

Replying to: CalExplorer (Feb 18, 2009 11:29 am)

MOST LIKELY YOUR THROTTLE POSITION SENSOR. LOCATED ON THROTTLE BODY AND COSTS AROUND $50.
#199 of 231
once again..Redraider by jutmac
Feb 28, 2009 (1:24 pm)
Reply
I changed out all to MSG....had to wait for taxes to come in....I also replaced the fuel regualtor and the timing was off....now set at 10 degrees.
 All is well except for the herky jerky at 35 mph....it used to only do it at this speed now it does it at whatever speed, unless i trounce on it....it runs good.
 
HERE IS THE KICKER:
 It does not do it when it is cold. I am sure it has something to do while on a closed loop but when it warms up back to normal...bucks and snorts....any shade tree answers..lol
 
by the way...thanks for all your past help...and anyone is welcom to reply
#200 of 231
Re: once again..Redraider [jutmac] by redraider28
Feb 28, 2009 (7:31 pm)
Reply

Replying to: jutmac (Feb 28, 2009 1:24 pm)

JUMAC,
 
Glad to hear most of the problems are gone. Did you change out ALL of the spark plugs and also the spark plug wires?
 
Sounds like we're on a role to getting you running smooth.
#201 of 231
Re: once again..Redraider [redraider28] by jutmac
Mar 01, 2009 (10:41 am)
Reply

Replying to: redraider28 (Feb 28, 2009 7:31 pm)

Raider..
 I did change them all out....Like i said though....it only does it when it warms up??
 Someone told me that when i use my tester on the wires and plugs that a fords should show blue spark.....i show orange...any truth to this??
 Everything is MSD. Someone also said it feels like a dead miss in it....do you think there could be a blown valve??/ I would like to know what you think before i do a compression check.
 
Again...Thanks
 
Jutmac
#202 of 231
bronco 4wd problems by xdeathbroncox
Mar 01, 2009 (5:36 pm)
Reply
i have the 91 silver series 5.8. and my 4wd will not kick in. its just the push button one and at first the 4x4 light didn't even com on but my bud told me to tap the little electric engine that locks the 4x4 into place and that might work. i taped it then the light came on but wen i put it into drive u don't hear the clunk and it doesn't go into 4wd. help me out please. im a new bronco owner and i really wanna mess some trails up with this thing. haha
#203 of 231
Re: 93 EB bronco 5.0 [redraider28] by khawley
Mar 04, 2009 (4:28 pm)
Reply

Replying to: redraider28 (Dec 18, 2008 7:50 pm)

I just got a 94 with the 5.8 and can't get it started. The vehicle has been sitting for about 5 years and there hasn't been an attempt to start it in at least 2.
With the ignition on I pushed down on that stem on the fuel rail and no fuel came out. I changed the fuel filter, checked the inertia swith, fuses, and relay.
I'm thinking it has to be the fuel pump but wanted to see if you had and advice before i went out and bought one.
 
Thanks!

Messages Page 21 of 24
1
...
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement