Sign In Join 



Ford Bronco Problems

231 messages,  Last post on Nov 21, 2009 at 2:24 AM

You are in the Ford Bronco Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Bronco


Messages Page 20 of 24
1
...
17
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion

#184 of 231
Re: Starting problem [dnolen] by flattop4x4
Oct 29, 2008 (6:06 pm)
Reply

Replying to: dnolen (Mar 10, 2008 11:29 am)

Well I haven't read down through any other possible replies, but I'll offer this question to you. Have you "EVER" replaced the fuel filter?
#185 of 231
Re: stalling when going into reverse [cwtcr] by bronco96kid
Nov 16, 2008 (4:20 pm)
Reply

Replying to: cwtcr (Oct 15, 2008 7:00 am)

I am having the same exact problem, same symptoms and everything. I took it to a shop and the guy ran the codes and said it was an internal tranny problem. I also have a 96 bronco, 351 with auto tranny w O/D. Has anyone figured this problem out yet?
#186 of 231
Re: Front End 93 eddie bauer 5.8 [devinque] by 82ncmarine
Nov 26, 2008 (11:02 am)
Reply

Replying to: devinque (Sep 01, 2006 8:19 pm)

well the most common cause is the "camber" bushings will need to be replaced. it is best to take it to a shop that does alignments.
#187 of 231
93 EB bronco 5.0 by bigblockman
Dec 18, 2008 (9:23 am)
Reply
i have had this bronco for 2 years and did me good. but i was out hunting and when i came out of the woods it started bucking and then died. i can get it to start but i can not get the rpm up. soon as i put it in drive and try to give it some gas it dies. i was told it is the timing cuz when trying to get the rpm up it will backfire under the hood. but had someone check it and it is fine and ides smooth. i think it might be my gas presher how can i test it. HELP LOL
#188 of 231
Re: 93 EB bronco 5.0 [bigblockman] by redraider28
Dec 18, 2008 (7:50 pm)
Reply

Replying to: bigblockman (Dec 18, 2008 9:23 am)

This is just a suggestion, because I have a 94 EB with the 5.8L. There's a fuel rail along the intake that supplies the fuel injectors (not sure about the 5.0). There's what looks like a tire air stem. With the car ignition turned on, but not running, so the fuel pump turns on, you can push down the stem and fuel should come out. Make sure the engine is COOL. If no fuel, start by changing your fuel filter then your fuel pump. If the fuel is not your problem, check your plugs, plug wires, coil, and distributor. If you've cracked one or more of your spark plugs with the off roading, it will cause the bucking when you rev the engine.
 
Hope this helps.
#189 of 231
93 Bronco--Ignition Problem by afindly
Jan 01, 2009 (9:24 pm)
Reply
My 93 Ford Bronco(351/EFI) quit running suddenly while idling .... have replaced the fuel filter. The Fuel Pump "Sounds" normal when turning on key to start, but have not checked further. When trying to start, engine turns over but does not fire. Checked the distributor .... cap and rotor seem functioning ok. Sprayed starting fluid (Deep Creep by makers of Sea Foam) into air inlet ... would not fire. Do you have a check-list of what to try next?? Is there an electronic module at the distributor that could fail & cause this behavior?
#190 of 231
Re: 93 Bronco--Ignition Problem [afindly] by redraider28
Jan 03, 2009 (9:04 pm)
Reply

Replying to: afindly (Jan 01, 2009 9:24 pm)

If your rotor and distributor look good, check your coil and spark plug wires. I changed all mine out to MSD (coil, distributor, rotor, wires) and changed my spark plugs while I was at it. Runs very smooth now. If that doesn't work, your computer module could be bad.
 
Hope it helps.
#191 of 231
P.O.S 2 things by jutmac
Feb 03, 2009 (3:02 pm)
Reply
I have a 93 bronco 5.0. I love my truck but it is always something.
First i cant get it to start. I moved it in the driveway and when i went out to drive it the next day it would not start. (1) It is getting fire when we checked. (2) when we checked the fuel rail it is getting fuel. (3) we primed it with starting fluid and it still wont catch. It turns over fine but wont start. H E L P! PLZ
Next it has a hurkey jerkey at about 30 -40 mph.
Thanks
#192 of 231
Re: P.O.S 2 things [jutmac] by redraider28
Feb 03, 2009 (7:30 pm)
Reply

Replying to: jutmac (Feb 03, 2009 3:02 pm)

POS2,
 
Mine was doing the same thing. Check out my post #190.
 
Hope it helps.
#193 of 231
Re: P.O.S 2 things [redraider28] by jutmac
Feb 04, 2009 (12:54 pm)
Reply

Replying to: redraider28 (Feb 03, 2009 7:30 pm)

Where is the computer module? Did this start it up AND stop the jerking?
Will try and let you know what happens
 Thanks for the input

Messages Page 20 of 24
1
...
17
18
19
20
21
22
23
24
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement