You are here: Forums SUVs Ford Bronco Ford Bronco Problems

Ford Bronco Problems

231 messages,  Last post on Nov 21, 2009 at 2:24 AM

You are in the Ford Bronco Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Bronco

Messages Page 18 of 24 1 ... 15 16 17 18 19 20 21 ... 24 Prev Next Last

Go To Msg # Search This Discussion

#165 of 231 Re: '93 full size trans "shudder"/vibration problem [droplever1] by buknbronco May 14, 2008 (4:15 pm)
Replying to: droplever1 (Apr 13, 2008 12:27 pm) I would recommend checking your drive shaft as well as your tranz. You may need new universal joints. If at 40-55 mph you start to fell like it wont go any faster then i recommend doing as i suggested, if it stops as you accelerate past this operating speed i would recommend having the front end checked. good luck! Replies to this message: droplever1 (May 23, 2008 6:24 am) flattop4x4 (Oct 29, 2008 5:59 pm)
#166 of 231 92 FORD BRONCO REAR DOOR REPLACEMENT by s2603 May 18, 2008 (3:52 pm)
Will a 1986 ford Bronco rear door fit a 1992 bronco? My stepson's bronco got hit by a school bus and the only door he can find is a 1986. If the 1986 will not work what years will fit. Thanks Replies to this message: droplever1 (May 23, 2008 6:27 am)
#167 of 231 Re: '93 full size trans "shudder"/vibration problem [buknbronco] by droplever1 May 23, 2008 (6:24 am)
Replying to: buknbronco (May 14, 2008 4:15 pm) thanks for the reply! i have checked the drive shaft and there does not appear to be any "slop." the "vibration" has now migrated to other points on the speedo and happens when accelerating. if i turn the "overdrive" off it happens less frequently but continues. i am also considering replacing the front shock towers. it looks scary though. any tips?
#168 of 231 Re: 92 FORD BRONCO REAR DOOR REPLACEMENT [s2603] by droplever1 May 23, 2008 (6:27 am)
Replying to: s2603 (May 18, 2008 3:52 pm) I have had some success by "googling" "ford replacement parts" if you don't find the exact door, you may still get an idea of what you can use instead. i'm not sure if i am supposed to do this or not, but i have used jeffs bronco graveyard.
#169 of 231 Re: 1990 Bronc 5.0 [90bronc] by cadman5 Jun 13, 2008 (5:51 am)
Replying to: 90bronc (Jun 05, 2006 9:30 pm) im not sure if it will help but i have a 1981 bronco with the windsor 302 (but out of a mustang) and i had the same problem of it stoping on me (left me right in the crap) like yours there was no spark... the tow truck driver said it was the amp for the dizzy... as i was going to mexico i left it untill then to buy a new one and while i was there i did so... when i got home to england i fitted it but to no avail... a friend of mine said stop messin about finding fault and just replace the whole dizzy with a HDI unit... i did this for £120 and it works perfect, all it needs is one live wire and one for the taco, and it is a performance part too... im very happy with it... go to geffs bronco graveyard they have them on the shelf for like $105..   hope it helps   Neil (from England)
#170 of 231 Code 18 by dj7 Jun 23, 2008 (7:23 pm)
I have an 88 Bronco 2 5speed 4x4. My cruse control doesn't work and i am getting trouble codes 18 and 29 , i replaced the ign module and the speed sensor i still get the same codes , i replaced the ecm still no help. Anybody have any ideas??
#171 of 231 Re: running rough [dgiusti] by supertoyota Jul 14, 2008 (9:05 pm)
Replying to: dgiusti (Mar 05, 2008 1:31 pm) hello my friend put that same stuff in his ranager and a week later had to buy fuel injectors for me i had to do a fuel pump
#172 of 231 is this a good deal by supertoyota Jul 14, 2008 (9:07 pm)
i find a good running 83 bronco for 2,000 and just wanting to know if this is a good deal has already been restored and looks great.
#173 of 231 Re: 1988 11 Bronco [dameen6] by supertoyota Jul 14, 2008 (9:36 pm)
Replying to: dameen6 (Mar 06, 2008 8:17 am) my brother just bought one does the same thing we have not find the answer to this prolem yet are self but try ur shift linking in the tranny
#174 of 231 Re: 95 eddie bauer 5.8 [pec] by redraider28 Aug 17, 2008 (6:07 pm)
Replying to: pec (Aug 13, 2006 6:07 am) Did you ever find out what the cause of this was? I have a 94 Bronco that does the same thing.   Can you email me at redraider28yahoo.com   Thanks Lance Replies to this message: tidester (Aug 17, 2008 7:33 pm) redraider28 (Sep 04, 2008 5:11 pm)

Messages Page 18 of 24 1 ... 15 16 17 18 19 20 21 ... 24 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Bronco Ford Bronco Problems