Last post on Oct 22, 2013 at 4:55 PM
You are in the Ford Bronco
What is this discussion about?
#144 of 352 Bronco's brake lights aren't working, but the turn signals are..?
Feb 25, 2008 (7:48 pm)
So I have a 1990 Ford Bronco II Eddie Bauer Edition. I haven't had many problems, until last week. There was a piece of metal in the middle of the road when my dad was driving so he pulled over to get it and turned on the emergency flashers. They flashed three times and then turned off. Since then, neither the brake lights or the emergency flashers are working, but the turn signals still work. He tried replacing the brake light switch and the turn signal switch, and neither of them worked. Just today, the flashers started working, but the brake lights still do not work.
So please help! My dad's too busy to get a lot of work done, and I'm a seventeen year old girl. What do I know about cars!
#145 of 352 Re: Transmission don't shift [hotpig]
Feb 25, 2008 (2:51 pm)
It sounds to me like the vacume mod. is not working or the vacume hose is off.
#146 of 352 89 5.0 idle problem
Feb 28, 2008 (6:53 am)
i have an 89 ford bronco with a 5.0l. the idle stays at 2k rpms until i shift it into gear. i have replace the iac motor and checked all linkage, cleaned the throttle body, tuned the motor, checked the egr, im about to pull my hair out. the transmission is also slipping in overdrive and the tranny mechanic that i took it to said the aod tranny is controlled by the computer. can any one help.
#147 of 352 Re: Transmission don't shift [storrs]
Feb 28, 2008 (6:54 am)
how can i test it
Feb 29, 2008 (3:44 pm)
96 Ford Bronco 351, I am on my 3rd EGR valve in three months. I have reset the code several times to verify code but it comes back on about a week after I put in new EGR. Code is EGR flow insufficient. P0401 it is the only code that comes up.
#149 of 352 Re: 89 5.0 idle problem [89blackntan]
Mar 01, 2008 (4:30 am)
mine did that,replaceed the thottle postion sencer
#150 of 352 88 FORD BRONCO (transmission problem)
Mar 04, 2008 (2:17 pm)
well i had this beast for about 3 years, it was given to me as a present,now i did not know it was going to give me so many problems,i put in so much money i could of bought another truck it has new suspension,new fuel tank,sending unit,etc.I got it running last year in november 2007. I took it for a ride and it started leaking oil alot.,so i pulled the transmission off,it was a pita! fixed the leak bought new converter,flywheel,put it back together now it doesn't move forward or reverse,it has oil,what could it b,before i pull it of again this is my third time,different reasons the first two and it was fine and running everything looks fine,everything was connected correctly,maybe someone can help me with this problem or had this happen,i hope its something simple.
#151 of 352 Re: 1991 Bronco [qftball]
Mar 04, 2008 (3:06 pm)
how yu doing,i have and 88 bronco 4x4 i had that problem i replaced the transmission housing gasket and on that housing their a seal and pump seal that fixed my problem and on that pump theirs two seals on it they were also bad i hope it helps.
Mar 04, 2008 (3:43 pm)
From the message I posted above, I am on my 3rd EGR valve in 3 months. Could the catalytic converter cause the EGR code ?
#153 of 352 Re: 93 Bronco gas problem [gator07]
Mar 05, 2008 (1:20 pm)
did you ever get the problem solved and what was it? I may be having the same problem with my 95.