Sign In Join 



Honda Accord (2003-2007) Maintenance and Repair

4943 messages,  Last post on Dec 04, 2009 at 4:51 PM

You are in the Honda Accord Forum. Your Hosts are pat & karens

What is this discussion about? Honda Accord, Electrical, Engine, Coupe, Sedan


Messages Page 439 of 495
1
...
436
437
438
439
440
441
442
...
495
Prev
Next
Last
Go To Msg #
Search This Discussion

#4379 of 4943
Re: Minor annoyance [tankbeans] by mrbill1957
Jan 08, 2009 (5:32 pm)
Reply

Replying to: tankbeans (Jan 08, 2009 3:57 pm)

My bet would be the water from shoes. If your floor mats and/or carpeting is wet, the evaporating water has to go somewhere, and when the car isn't running, the first thing to get cold is the windows, so that's where the water is going to collect first.
 
I've already taken the mats inside and placed them by my heating vents for the night. That did a good job of getting rid of all or at least most of the water.
 
Mrbill
#4380 of 4943
Re: Minor annoyance [mrbill1957] by tankbeans
Jan 08, 2009 (5:47 pm)
Reply

Replying to: mrbill1957 (Jan 08, 2009 5:32 pm)

Thanks for the tip. I will try that. It really annoying as you can guess.
#4381 of 4943
Accord Glow plug warning light by mechainical
Jan 09, 2009 (12:05 pm)
Reply
Hey all,
 
This is my first post here, so please bare with me.
 
The ploblem is with my 2005 2.2 i-cdti accord. Every now and then, when I get to about 3,000rpm, the engine looses power. It does not stop the engine, but the glow plug light comes on and starts flashing. When this happens the engine is limited to about 2100rpm, in all gears, and does not want to go any higher.
 
The only way I can get it to run normally again, is to pull over, turn off the engine for a few minutes and restart. Once I do this, it runs ok, as long as I keep the RPM low.
 
The thing is, it does not happen every day, so I am stumped for a cause.
 
Has anyone had this problem, or related problem, and if so, what was the fix?
 
Thanks.
#4382 of 4943
Re: Accord Glow plug warning light [mechainical] by elroy5
Jan 09, 2009 (12:39 pm)
Reply

Replying to: mechainical (Jan 09, 2009 12:05 pm)

Have you disconnected the battery recently?
#4383 of 4943
by mechainical
Jan 09, 2009 (1:03 pm)
Reply
Nope, never done that. It had been in my drive for about two weeks though without being started. But I really don't think that that would cause this. I work a month at a time out of the country, and have never had anything like this happen before, in almost two years!
#4384 of 4943
Re: Accord Glow plug warning light [mechainical] by mrbill1957
Jan 09, 2009 (2:56 pm)
Reply

Replying to: mechainical (Jan 09, 2009 12:05 pm)

Gees, I don't remember any other posts for an Accord diesel. Maybe it deserves it's own thread based on Accord diesel issues?
 
Mrbill
#4385 of 4943
Re: Accord Glow plug warning light [mrbill1957] by mechainical
Jan 09, 2009 (3:35 pm)
Reply

Replying to: mrbill1957 (Jan 09, 2009 2:56 pm)

Good point, and good idea.
#4386 of 4943
Re: Air Filter Change in 2004 Accord I4 [srizvi1] by tallman1
Jan 09, 2009 (5:32 pm)
Reply

Replying to: srizvi1 (Jan 07, 2009 8:17 pm)

Did you grab your filters from handa-accessories.com by any chance?
 
I did this time. HandA is a great place. The last time, I had a 15% off parts coupon from a Honda dealer so I bought stuff there. That was the one and only time I've seen that sort of coupon.
#4387 of 4943
Honda Accord 2005 wth a interior convenience item stuck coin pocket lid by calp
Jan 10, 2009 (11:44 am)
Reply
Looking for someone who had a similar problem with change getting wedged in the back of the coin pocket at the top of the gear shift and wedging open the lid?
#4388 of 4943
Re: Honda Accord 2005 wth a interior convenience item stuck coin pocket lid [calp] by bugs22
Jan 12, 2009 (8:41 pm)
Reply

Replying to: calp (Jan 10, 2009 11:44 am)

I had a dime fall into a space at backside of the pocket in my 2006 Accord and it prevented the cover arm from pivoting. I tried to remove the rubber liner first and that didn't give me access....don't try it because it doesn't fit correctly now. After a couple of months I pried the dime out with two pieces of wire. Lid shuts fine now. I remember working at it a long time but with patience it's possible.

Messages Page 439 of 495
1
...
436
437
438
439
440
441
442
...
495
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement