Sign In Join 



Honda Accord (1998-2002) Maintenance and Repair

1936 messages,  Last post on Nov 21, 2009 at 5:35 PM

You are in the Honda Accord Forum. Your Hosts are pat & karens

What is this discussion about? Honda Accord, Electrical, Engine, Coupe, Sedan


Messages Page 93 of 195
1
...
90
91
92
93
94
95
96
...
195
Prev
Next
Last
Go To Msg #
Search This Discussion

#912 of 1936
Aftermarket cat converter by activex111
Jun 27, 2007 (11:43 am)
Reply
Hi,
I needto replace the cat converter on my 99 Accord-V6 with 115K miles on it. The OEM cat converter replacement is almost $840 + Tax. Got a few aftermarket cat quotes for around $350.
Has anyone had any experience with aftermarket cats? also, they told me that it has to be welded in, not bolted.
#913 of 1936
Re: Accord Transmissions [kiawah] by Mr_Shiftright HOST
Jun 27, 2007 (12:50 pm)
Reply

Replying to: kiawah (Jun 27, 2007 5:33 am)

I agree with kiawah---a bad mainshaft bearing in the transmission.
#914 of 1936
'98 Accord HVAC temperature light bulb by ron_m
Jun 27, 2007 (6:16 pm)
Reply
Have any of you guys ever had to replace the light bulb for the red and blue arc-shaped marking above the HVAC temperature control knob? My Accord is a '98 model and it appears as though I may have to remove the digital clock before the two screws at the bottom of the HVAC/Stereo trim bezel--in order to gain access to the bulb that needs replacing. Maybe I'm wrong about this. Hopefully the bulb won't cost me very much and this will end up being a DIY type of project for me.
 
Ron M.
#915 of 1936
Re: 1998 Accord Speed Sensor [elroy5] by dea8805
Jun 29, 2007 (10:59 am)
Reply

Replying to: elroy5 (Jun 25, 2007 1:08 pm)

Thats not like mine - mine has a connector for the wiring and a gear which I assume goes into the transmission somehow. I assume its under the throttle body but I can see where it might be. I need a good picture and some instructions - the chilton's manual was no help. Ahhh!!! Thanks for trying
#916 of 1936
Re: '98 Accord HVAC temperature light bulb [ron_m] by user777
Jun 30, 2007 (4:24 am)
Reply

Replying to: ron_m (Jun 27, 2007 6:16 pm)

try these two links, the first for the installation of a CD player in the accord and how to remove various pieces of the dash:
http://www.handaaccessories.com/accord/accordcd.pdf
 
the second, the parts for the instrument panel garnish:
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=Accord&catcgry2=1998&catcgry3=4DR+LX&catcgry4=KA5MT&catcgry5=INSTRUMENT+PANEL+GARNISH
 
hope it helps.
#917 of 1936
Re: 1998 Accord Speed Sensor [dea8805] by dea8805
Jun 30, 2007 (4:52 am)
Reply

Replying to: dea8805 (Jun 29, 2007 10:59 am)

I figured it out. Its on the passenger side under the air intake to the throttle body. Had to remove the plastic intake pipe in order to see it. Remove one bolt that holds it on (12mm) pull it out. disconnect the leads, put the new one in and bingo - fixed everything.
#919 of 1936
Re: 1998 Accord Speed Sensor [dea8805] by elroy5
Jun 30, 2007 (9:16 am)
Reply

Replying to: dea8805 (Jun 30, 2007 4:52 am)

Glad you got it dea8805.
#920 of 1936
99 accord ex master clutch cylinder by agirlshonda2nv
Jul 02, 2007 (5:07 am)
Reply
I have a 1999 accord ex. I recently replaced the slave cylinder and the master clutch cylinder. There was clutch fluid leaking out from where the hydrolic line goes into the master cylinder. I got that taken care of. Now it looks like it's leaking out from underneath the master clutch cyl. Can you give me any suggestions, hints, anything?!?! i've been working on this darn car for 3 days now. Thanks so much.
Bekah
#921 of 1936
Re: 99 accord ex master clutch cylinder [agirlshonda2nv] by Mr_Shiftright HOST
Jul 02, 2007 (8:05 am)
Reply

Replying to: agirlshonda2nv (Jul 02, 2007 5:07 am)

your post is confusing. First you say you replaced the slave and clutch master. Then you say you fix the leak from the "master" and then you say the clutch master is leaking.
 
You need to clarify a bit for us.
 
Are you also talking about the BRAKE master cylinder?
 
When you say "leak", do you mean it's dripping from where the line screws into the master? Does it drip by itself or only when you pump it?

Messages Page 93 of 195
1
...
90
91
92
93
94
95
96
...
195
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement