You are here: Forums Sedans Honda Accord Honda Accord (1998-2002) Maintenance and Repair

Honda Accord (1998-2002) Maintenance and Repair

1936 messages,  Last post on Nov 21, 2009 at 5:35 PM

You are in the Honda Accord Forum. Your Hosts are pat & karens

What is this discussion about? Honda Accord, Electrical, Engine, Coupe, Sedan

Messages Page 91 of 194 1 ... 88 89 90 91 92 93 94 ... 194 Prev Next Last

Go To Msg # Search This Discussion

#901 of 1936 Re: What the heck? [channel121] by blufz1 Jun 22, 2007 (7:14 pm)
Replying to: channel121 (Jun 22, 2007 6:19 pm) Take the car to a Honda dealer and get a second opinion.
#902 of 1936 Re: What the heck? [channel121] by elroy5 Jun 22, 2007 (7:28 pm)
Replying to: channel121 (Jun 22, 2007 6:19 pm) Finding a good mechanic is hard enough, but you also have to find an honest mechanic. If you know little or nothing about cars, you are at the mercy of whatever the guy tells you. I can make simple repairs myself, and a friend's father is a mechanic, so I'm lucky in that regard. If you don't know a good mechanic, I think the best bet is the dealership. The dealership will overcharge you, but at least you have a good chance of getting it fixed right. Some other shops will overcharge you, and still not fix the car.
#903 of 1936 Dealership here I come.... by channel121 Jun 22, 2007 (9:23 pm)
You got it! I was thinking just that. The dealership I took it to for warranty work tried to pad the bill(but only $40 more, not 1K) before but it's worth a try. Thanks for the feedback. I am getting the jist that maybe this guy isn't above board. Darn, in business over 50 years...oh well.   So I am right in saying that the cam seals and crank seals are ONE thing on the car; that once they are replaced there are no OTHER cam or crank seals to replace? Have you ever even heard of the struts leaking at 91K? I noticed that since these probs were not noted on this site that it perhaps was not prevalent.....
#904 of 1936 dent fix by srx2870 Jun 24, 2007 (10:53 am)
thanks for all the good people who helped me with my last question.   I got a dent on the side of the car, still dont know what made it, it is not a big dent and i guess it is very easy to fix. anyone know around how much to fix a dent? Replies to this message: elroy5 (Jun 24, 2007 12:07 pm)
#905 of 1936 Re: dent fix [srx2870] by elroy5 Jun 24, 2007 (12:07 pm)
Replying to: srx2870 (Jun 24, 2007 10:53 am) I would check out one of those paint-less dent removal places. They use special tools to push the dent out from the back side. It may cost you a good bit (depends on how hard the dent is to get to), but there is no paint matching to worry about, which is never perfect.
#906 of 1936 1998 Accord Speed Sensor by dea8805 Jun 25, 2007 (9:38 am)
I have a 1998 Accord LX 4Cyl 4dr 5 speed manual. The Check engine light is on and the speedometer and cruise control do not work. Took it to the local auto shop and the code says its the speed sensor. Can someone tell me where its located (someplace on the transmission is what I was told) and how to replace it?   Thank you!!! Replies to this message: elroy5 (Jun 25, 2007 1:08 pm) dea8805 (Jun 29, 2007 10:59 am) dea8805 (Jun 30, 2007 4:52 am) and 1 more...
#907 of 1936 Re: 1998 Accord Speed Sensor [dea8805] by elroy5 Jun 25, 2007 (1:08 pm)
Replying to: dea8805 (Jun 25, 2007 9:38 am) If this link does not go straight to the VSS part, just click on VSS on the left. Your 98 Accord may not be exactly like this, but I assume it's pretty close. Good luck Link below   http://techauto.bravehost.com/ Replies to this message: dea8805 (Jun 29, 2007 10:59 am) dea8805 (Jun 30, 2007 4:52 am) elroy5 (Jun 30, 2007 9:16 am)
#908 of 1936 Accord Transmissions by accordtrans Jun 26, 2007 (4:06 pm)
I have a 2001 Accord, 4 cyl. with a 5 speed. With the clutch pedal depressed, there is no noise. When the pedal is released, even in neutral, there is a very loud roaring noise that increases with engine RPM. What could this be? Also, when the clutch pedal is depressed, is the throwout bearing turning, or is it turning when the pedal is released? Or both? Please respond. Thank you for your time. Replies to this message: blane (Jun 26, 2007 6:14 pm) pat (Jun 27, 2007 3:03 am) kiawah (Jun 27, 2007 5:33 am) Mr_Shiftright (Jun 27, 2007 12:50 pm)
#909 of 1936 Re: Accord Transmissions [accordtrans] by blane Jun 26, 2007 (6:14 pm)
Replying to: accordtrans (Jun 26, 2007 4:06 pm) You should have gone to the Honda Accord (1998-2002) Maintenance & Repair forum here: http://tinyurl.com/327mkk Replies to this message: pat (Jun 27, 2007 3:03 am)
#910 of 1936 Re: Accord Transmissions [blane] by pat HOST Jun 27, 2007 (3:03 am)
Replying to: blane (Jun 26, 2007 6:14 pm) Thanks blane - you can see that I moved the post to the discussion you suggested.   By the way, be sure to remove any numbers after the final slash when linking to a discussion unless your intent is to link to a specific post. If there is no number after that last slash the last page of the discussion will be displayed. If a number exists, a specific post is linked. That makes it a little harder for a newbie to see what to do next.

Messages Page 91 of 194 1 ... 88 89 90 91 92 93 94 ... 194 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Honda Accord Honda Accord (1998-2002) Maintenance and Repair