You are here:
Forums
Sedans
Honda Accord
Honda Accord (1990-1993) Maintenance and Repair

1756 messages, Last post on Nov 29, 2009 at 10:14 AM
You are in the Honda Accord Forum. Your Hosts are pat & karens
|
Replying to: cybercool (May 03, 2008 7:44 am)
|
|
|
Replying to: elroy5 (May 03, 2008 8:09 am) You're very helpful. I can't really see the one before the cat converter with hood open. Maybe I'm looking at wrong location. I was told it's underneath and in front of cat converter. If I buy the parts (sensors) do you think it'll be expensive to replace? Do I have to replace both? Thanks Cybercool
|
|
|
|
|
Replying to: miotch00 (Apr 13, 2008 10:34 pm) good luck |
|
|
|
|
Replying to: willyshes1 (Apr 20, 2008 8:20 pm) Cleaning out the EGR (soak) and it's assorted passages (poke) is a summer project due on my baby, so I'm with you in spirit until it gets a bit warmer |
|
|
|
|
Replying to: elroy5 (Apr 27, 2008 7:37 pm) I doubt a flush is a good idea, or necessary, on high mileage cars but you are crazy to NOT CHANGE at least some of the fluid at a time. What's the point of letting the stuff sit in there, lose all it's cooling/lubricity, and then shell out for a new tranny or ditch the car? Anyone who recommends that (barring some very special vehicular circumstances) should probably have the bottle taken from their hand and be given a spot to catch a nap. As for "evidence", my vehicle is
|
|
|
Replying to: cybercool (May 03, 2008 8:53 am) |
|
I am driving a HOnda Accord SV4 year 95.the problem is whenever i speed,merely 20 kmh,a noise comes from the engibe,similiar to the ones Harley davidson bikes produce..i have just got my car Top over hauled,replacing major componenets like Blocks,piston,rings etc..why is this noise ?
|
|
|
|
|
Replying to: rajkmr02 (May 03, 2008 8:33 pm) |
|
|
Replying to: mrbill1957 (May 01, 2008 6:07 pm) |
|
|
1991 accord 300k. Car ran at lunch time but would not start at the end of the day. Turns over. Has gas, does not sound like it is firing at all. Checked distributor and replaced rotor and cover. Cam is spinning so I know the timing belt is not broken. Tried starter fluid into the intake but no fire. Put a screwdriver into the spark plug cap and held near ground but no spark. Any ideas? Thank you.
|
|
You are here:
Forums
Sedans
Honda Accord
Honda Accord (1990-1993) Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Honda Accord



Browse by Board
Browse by Topic
Today's Chats