You are here: Forums SUVs Ford Escape Ford Escape Fog Lights

Ford Escape Fog Lights

38 messages,  Last post on Aug 01, 2009 at 10:58 AM

You are in the Ford Escape Forum. Your Hosts are steve_ & tidester

What is this discussion about? Ford Escape, Ford, Lights, SUV

Messages Page 4 of 4 1 2 3 4 Prev Next Last

Go To Msg # Search This Discussion

#29 of 38 Re: fog lights [kenny2469] by theconsultant Sep 25, 2006 (3:54 am)
Replying to: kenny2469 (Sep 24, 2006 10:14 pm) Looks great I just set up a fast page for mine . I will add more later. http://www.cardomain.com/ride/2465718/1
#30 of 38 Re: Adding Factory Fog lights to a Ford Escape [kenny2469] by djolescape Nov 26, 2006 (12:33 am)
Replying to: kenny2469 (Sep 24, 2006 9:01 am) Hi Chris,   Can you please elaborate how did you wire up the lights to the dash board. I managed to remove the bumper and I can see those factory installed wires to connect to. Where those wires appear in the cabin, where did you install a switch on the dashboard, does it require mounting off the dashboard, did you need to add any fuses or relays along the path?   I have 2002 Escape.   Best regards George Replies to this message: kenny2469 (Nov 27, 2006 12:44 am)
#31 of 38 Re: Adding Factory Fog lights to a Ford Escape [djolescape] by kenny2469 Nov 27, 2006 (12:44 am)
Replying to: djolescape (Nov 26, 2006 12:33 am) Just to the left of the power mirror switch, there is a "blank" square insert, same size as the hazzard light and rear window defroster button. It is a blank, or "dummy" cover just to fill the space. Get a small flathead screwdriver and pop it out. Attached to the inside of that "blank" will be the plug that goes right into the actual switch that you need to buy, either from a dealer or scrap yard, just plug in and push it back in. You next need to goto your local dealer and get the computer programmed to enable the lights. The light icon will apear as soon as you plug it in, but dont be happy, they wont work til they get programmed.   Keep in mind, this is how it is on my 2006.....   Hope this helped.....
#33 of 38 2008 Escape Fog Lights by xx7111 Feb 01, 2008 (4:40 am)
Does anyone know if the fog lamp bulb P/N PS24WFF translates to a standard P/N such as H4 or 9145? Looking to replace the OEM bulbs with something such as Silverstar's. Replies to this message: quetelle (Mar 15, 2008 7:09 am) kobseb (Feb 15, 2009 9:12 am)
#34 of 38 Re: fog lights [kenny2469] by quetelle Mar 15, 2008 (7:08 am)
Replying to: kenny2469 (Sep 24, 2006 10:14 pm) Hi, I have a 2008 Ford Escape Hybrid and it looks like you have/had the same fog lights I do (PS24WFF) and you either found a bright bulb or found a way to install HID's from the looks of the pictures on your domain. If they are HID's, which bulb pattern did you use. Thanks. Replies to this message: stevedebi (Mar 27, 2009 2:12 pm)
#35 of 38 Re: 2008 Escape Fog Lights [xx7111] by quetelle Mar 15, 2008 (7:09 am)
Replying to: xx7111 (Feb 01, 2008 4:40 am) it took me a while to figure out how to take the bulb out and it's no where close my friend.
#36 of 38 Re: 2008 Escape Fog Lights [xx7111] by kobseb Feb 15, 2009 (9:12 am)
Replying to: xx7111 (Feb 01, 2008 4:40 am) PS24WFF is H16 or 9009.   H16 is a special bulb made for GM trucks and SUV. But since 2008 Ford use it on his truck and the Escape was the first.   You can buy it from www.putco.com or make a search on yahoo or google.
#37 of 38 Re: fog lights [quetelle] by stevedebi Mar 27, 2009 (2:12 pm)
Replying to: quetelle (Mar 15, 2008 7:08 am) "Hi, I have a 2008 Ford Escape Hybrid and it looks like you have/had the same fog lights I do (PS24WFF) and you either found a bright bulb or found a way to install HID's from the looks of the pictures on your domain. If they are HID's, which bulb pattern did you use. Thanks."   I have a 2008 FEH with factory fog lights, and it uses a different switch than the ones described for the 2006 in this forum. My fog lights activate by the same rotating switch that works the headlights - you pull the switch out to turn on the fog lights.   I'm not sure if the stock switch has this capability, or if you can use a different switch, or if you would have to insert a new switch that is capable of fog light operations. But in any case it appears that the Ford dealer will need to program the SJB.
#38 of 38 Fog Lights for my 2001 Escape by dolfan0118 Aug 01, 2009 (10:58 am)
I purchased a Fog light switch after seeing the wires when replacing the headlight lens. So now I want to install them myself, so what is the final solution to getting them to work? Thanks.

Messages Page 4 of 4 1 2 3 4 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Ford Escape Ford Escape Fog Lights