Last post on Feb 19, 2007 at 10:37 AM
You are in the Speed Shop Tuning and Modification
What is this discussion about?
#1 of 6 3" lift 05 tacoma
Nov 08, 2005 (7:04 pm)
picked up floor vibration 25mph ??
#3 of 6 Re: 3" lift 05 tacoma [steve_]
Nov 09, 2005 (6:25 pm)
thank you will try that post ?
#4 of 6 Re: 3" lift 05 tacoma [dcox4]
Dec 30, 2005 (12:47 am)
Hey man I have a '05 taco with a 2.5" Daystar spacer lift. I had it put on in october and the front right C.V. boot got a hole in it in nov. Just before it was repaired, I noticed a vibration in the front end 30 mph. They said it was "lift niose" whatever that means. After two weeks of it vibrating I took it back and they replaced the front right wheel bearings. Still vibration. Then they said your tires are "separated", wrong. I finally put my stock tires and wheels back on and then they realized "it haw a vibration in the frontend". The front diff. was to blame from the factory. Metal were in the diff. fluid.
#5 of 6 Re: 3" lift 05 tacoma [dcox4]
Feb 19, 2007 (10:37 am)
Its either your cv joints have too much pressure of them after the lift. they make drop arms to compensate for it. The other thing is your transfercase could have pressure on your drive lines and thus giving you vibration from your yoke or U-Joint.
Hope this helps,