Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Pontiac G6 Pontiac G6 Hardtop Convertible
721 messages, Last post on Nov 18, 2009 at 5:39 AM
You are in the Pontiac G6 Forum. Your Hosts are pat & karens
|
Replying to: slinkers (Feb 04, 2009 4:23 pm)
|
|
|
Replying to: slinkers (Feb 06, 2009 6:22 am) If 07 specifies the same part # as 08 and 09, then it is the same part. If a part gets revised heavily, we call that a supersession and there is a brand new part # given. |
|
|
Replying to: bxd (Feb 05, 2009 11:37 am) I have the 4 door sedan, I have a more rare 4cyl, with the leather, roof. I have only seen a few out like mine. The rest seem to have just the cloth, or one of the other. I do like it. But, really disappointed with the engine. It is no way near the way of my 06 Accord 4cyl I had. It could be, but the transmission is too weird and finicky. 4spds. If you are in traffic, it seems to keep jump up and down in gears, not too smooth either. Honestly, if it did have a better engine, it would be a more complete set up. It is quite a solid car. |
|
|
I've had my 2007 G6 convertible for almost 2 years. I love it! I do have to take it to the dealership soon though. I was recently driving down the street and heard a lound noise like my tire blew out. No problem with any of the tires. I noticed a dent in the back corner of the roof a couple days later. There is no scratch on the outside so I'm sure nothing fell from the sky. I put the top down while my husband was checking it out. It looks like there's a metal braket that may have slipped and made the roof pucker from the inside. Has anyone had this problem? I want to have some amunition when I take it to the dealer so I don't get the run around. Any info would be great....Thanks!
|
|
|
Replying to: sknsgrl (Feb 09, 2009 9:04 am) Could you imagine if they pulled the plug on a few SUV's from hitting the showroom, because we have enough, then put some $$$ into a new car, perhaps even into the new G6. Re-do the whole car, design, fit and finish, the whole package. That would be amazing!! Instead, they just keep building as many cars as possible. With very little money to work with. Honestly, with no disrespect to the Pontiac or G6, I own an 08 G6. I think its dying very slowly, almost painful, a little embarrassing for them if they call the new model revised. When compared to its competitors. You sit a new Mazda, Acura, VW, Honda, Sorta looks a bit silly,looks like a Hot wheels car. Its so done. The non revised model looks much more classy. Simple, and really is a sporty looking concept. My dealer sells VW, Benz, Audi, GMC, Pontiac, wide variety, you can compare all of them, the G6 looks quite dated, and I think the revised G6 makes it look even more dated, as weird as that sounds. Leave it alone or kill the whole car. lol, I like my G6, grown to love it. I am still not a GM fan though. Its a love/hate relationship..lol. Hate, mostly because GM is not spending wisely and I am supporting them now with my payment. |
|
|
Replying to: sknsgrl (Feb 09, 2009 9:04 am) If you could be more specific on where this pucker is, I think I could be of assistance. Front panel or rear panel (I am assuming front), and then where on the panel you are seeing the pucker (driver side, passenger side, approximate distance from the panel to panel seal line, and approx distance from the door glass seal)? This will help me on what "zone" of the panel you are in and what might be causing it. Hope I can help |
|
|
|
|
Replying to: g6topls (Feb 28, 2008 9:02 pm)
|
|
|
Replying to: polarisgirl19 (Mar 11, 2009 12:42 pm) I also met someone in the parking lot the other night with a 2007 and she also had the same issue with the whistling noise and it is something to do with the exhaust.
|
|
|
|
I finally found a low milage G6 GT Convertible. I have read about all of the off and on top issues and I have called the original selling dealer and he has told me that the only warrenty issues it has ever has is that it had the top locating pins replaced twice once at 4K miles and onle at 8K miles it has 23k on it now and seems to be in great shape. According to the VIN number it was the 530 to roll off of the line so it is a early model anything I should watch for before the factory warrenty expires?
|
|
|
|
|
Replying to: catkc (Mar 11, 2009 12:55 pm) |
|
You are here:
Forums
Sedans Pontiac G6 Pontiac G6 Hardtop Convertible
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2009 Pontiac G6
Browse by Board
Browse by Topic
Today's Chats
