- #2629 of 3125
-
Re: 07 LTZ window tint [tom213]
by seabyrd
-
Jul 07, 2007 (6:14 am)
-
|
|
Replying to: tom213 (Jul 07, 2007 6:00 am)
Go to www.coastaltech.com .. yes you can install it yourself.. the hardest part is pulling off the trim around the radio.. its just clipped on but you think you are going to break it...it does just pull off.. the rest is easy.
Can't remember the price but very reasonable. the price is on their website.. they are great to deal with.
Good luck.. let us know how it comes out if you do it.
|
- #2630 of 3125
-
Re: 07 LTZ window tint [seabyrd]
by seabyrd
-
Jul 07, 2007 (7:38 am)
-
|
|
Replying to: seabyrd (Jul 07, 2007 6:14 am)
OOPS !! sorry... just noticed a typo... its www.coastaletech.com ... sorry about that..
Good Luck !!
|
- #2631 of 3125
-
Re: 07 LTZ window tint [seabyrd]
by tom213
-
Jul 07, 2007 (1:07 pm)
-
|
|
Replying to: seabyrd (Jul 07, 2007 7:38 am)
Thanks seabyrd. I checked it out and I see that they're still $249. It would be nice to have for our upcoming road trip to Minnesota, but it looks like I'm going to have to divert those funds into gas money now! Gas just shot up to $3.05 a gallon and is expected to go higher here because a nearby refinery was flooded out with all our recent heavy rains here in Oklahoma. We have a Z71 Tahoe, and like yourself, we love the ride and it's a great traveling vehicle.
|
- #2632 of 3125
-
Re: 07 LTZ window tint [seabyrd]
by junglegeorge
-
Jul 07, 2007 (2:32 pm)
-
|
|
Replying to: seabyrd (Jul 06, 2007 8:35 pm)
I am having issues with my bypass, who's unit did you purchase? Thanks George
|
- #2633 of 3125
-
Re: 07 LTZ window tint [junglegeorge]
by seabyrd
-
Jul 07, 2007 (6:47 pm)
-
|
|
Replying to: junglegeorge (Jul 07, 2007 2:32 pm)
What kind of issues are you having? We have the GM GEN2 LOCKPICK.. from coastaletech the new GM GEN3 is supposed to be even better but I can't see how.. What issues are you experiencing?
|
- #2634 of 3125
-
lockpick sitting in the console for the last yr!
by chile96
-
Jul 07, 2007 (7:07 pm)
-
|
|
i bought the lockpick last summer but STILL haven't figured out how to take off the darned trim - any suggestions?
|
- #2635 of 3125
-
Re: lockpick sitting in the console for the last yr! [chile96]
by seabyrd
-
Jul 07, 2007 (7:35 pm)
-
|
|
Replying to: chile96 (Jul 07, 2007 7:07 pm)
Just pull it off.. it has several catches around the edges... be careful but pull firmly.. it scared me and I ended up mad and pulled it and it came off... get some teflon spatulas (they are thin) and slide in behind it... ease it around the edge (teflon won't scratch it) then when you have it lifted a little all around it will pop off.. If it scares you too much drive by the Chevy paint & body shop.. they'll probably pop it off for you for nothing if you don't tell them what you're doing.. just tell them you're adding something..
|
- #2636 of 3125
-
Re: lockpick sitting in the console for the last yr! [seabyrd]
by chile96
-
Jul 08, 2007 (8:45 am)
-
|
|
Replying to: seabyrd (Jul 07, 2007 7:35 pm)
did you pry it between the outer edge and the console or the inner edge and the radio head unit
|
- #2637 of 3125
-
Re: lockpick sitting in the console for the last yr! [chile96]
by seabyrd
-
Jul 08, 2007 (9:49 am)
-
|
|
Replying to: chile96 (Jul 08, 2007 8:45 am)
I pried from the outer edge.. its held on with plastic snaps half the snap is a part of the frame.. get under it carefully in several spots then use an even pressure to pull it off.. Once you get it off and see it you'll wish you had just pulled a little harder sooner... just make sure you don't pull it from just one spot.. Let me know how it comes out for you.. once you get it off you'll be finished in 20 mins. test it while driving before you put the trim back on !! Again.. good luck..
|
- #2638 of 3125
-
Re: 07 LTZ window tint [seabyrd]
by junglegeorge
-
Jul 08, 2007 (4:38 pm)
-
|
|
Replying to: seabyrd (Jul 07, 2007 6:47 pm)
I installed a Gen II last December, ever since I have strange electrical issues, intermittently the radio will not power up, the back up sensors will not work, the radio will work but the Nav will not function, the shift indicator will just flash, or some other electrical module will not work. It took GM several months to determine that it was the Gen II. I called Costal Tech, they state they have not seen this issue before, and that they have thousands of happy customers. They are sending me a replacement unit, thinking that the unit is defective, or I screwed up the installation. I up-graded to the Gen III just for kicks. I will let you know if this solves the issues. George
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
