You are here: Forums Speed Shop Tuning and Modification Increasing Horsepower/Torque/MPG

Increasing Horsepower/Torque/MPG

21 messages,  Last post on Sep 27, 2007 at 5:36 AM

You are in the Speed Shop Tuning and Modification Forum. Your Host is steve_

What is this discussion about? Performance Mods

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#20 of 21 Re: why i don't know [Mr_Shiftright] by paisan Aug 19, 2007 (7:56 pm)
Replying to: Mr_Shiftright (Aug 19, 2007 5:45 pm) I agree, especially on 4 cylinder cars, intake and exhaust will be modest at best.   -mike
#21 of 21 GM 4.3 HP Increase, MPG increase by tc07 Sep 27, 2007 (5:36 am)
Replying to: the_big_al (Jun 27, 2008 3:16 pm) On GM's 4.3 engine with distributor ...up to at least 2001 model as I had, Put on an MSD Ignition, HP distributor module, rotor and cap. Next add MSD ignition coil and Taylor (or a good set) of wires. Then put in AC Delco Rapid Fire or Bosch +4 sparkies. I did this and GAINED 5 MPG highway and Dyno'd 28+ HP! I then added Hypertech Power programming due to having to put on 245/50/15 tires and traction bars to get needed traction on dry pavement...not to mention wet.   In all the MSD ignition more than paid for itself in gas savings the first year I had the S-10, EXT Cab and LS Sportside bed. I just sold it after having it 7 years.

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Speed Shop Tuning and Modification Increasing Horsepower/Torque/MPG