Sign In Join 



Mazda5 Owners Accessories & Modifications

588 messages,  Last post on Nov 08, 2009 at 4:32 AM

You are in the Mazda Mazda5 Forum. Your Host is Karens

What is this discussion about? Mazda MAZDA5, Van


Messages Page 56 of 59
1
...
53
54
55
56
57
58
59
Prev
Next
Last
Go To Msg #
Search This Discussion

#550 of 588
Re: Pulled out the head unit [denin] by vg33e power
Jan 23, 2009 (11:35 am)
Reply

Replying to: denin (Jan 23, 2009 10:42 am)

Unfortunately denin, I believe you will have to remove the shifter knob, shifter bezel, both left and right center panels to get to the two screws holding down the center radio bezel. You may want to contact you local Mazda dealer and get a print out of the "installation instructions" for installing an iPod interface module. These instructions will walk you step by step on how to remove the radio. Good luck!
#551 of 588
Mazda 5 rear wiper insert by marlonchwo
Feb 07, 2009 (5:34 pm)
Reply
Hi,
 
I am in Toronto, and got a 2006 of Mazda 5. I am looking for the rear wiper insert, but have no luck in local Walmxxx or Caxxxxxx Tixx. May anyone let me know where can I get the replacement? Thanks.
 
Mchow
#552 of 588
Re: Mazda 5 rear wiper insert [marlonchwo] by jonat1x
Feb 07, 2009 (6:00 pm)
Reply

Replying to: marlonchwo (Feb 07, 2009 5:34 pm)

Why not go to a Mazda dealer? If that is not convenient, Med Center Mazda in AL has an extremely helpful mail order service - http://www.mazdaparts.org/ Unlike the front blades, which are entirely generic (I have Michelin refills on my '08) the rear wiper is specific to the vehicle and I think yuo are stuck with Mazda OEM.
#553 of 588
Re: Mazda 5 rear wiper insert [marlonchwo] by athenasius
Feb 07, 2009 (7:41 pm)
Reply

Replying to: marlonchwo (Feb 07, 2009 5:34 pm)

I think it is about 10 dollars at the dealer. Remember you will have to pay duty and exchange from the US sites so the $9US will become over $11 then plus shipping and duty will cost you way more than getting one from the dealer . I just pull off the rubber and cut one to fit( I usually use one of the front ones and move the metal retainer from one to the other.
 
But for the 10 minutes that takes it may be easier to just buy one from the dealer.
 
PS do not just get the rubber only(from the dealer) for the back as it costs more than the assembled one.
#554 of 588
On board computers by vicenac
Mar 03, 2009 (2:56 pm)
Reply
Did anybody try to put a computer (PC) inside a M5? Where would be the better place to mount it? I'm thinking like a MSI Wind or the like.
#555 of 588
belt and engine noise.... by cooppoop
Mar 31, 2009 (7:20 pm)
Reply
I have a 2007 Mazda 5 with 30,000 on it. I just started noticing a valve tapping noise from the engine in all temps and a noisy belt in cold weather. Anybody else have this? It is a big difference from the car I test drove and actually hit the started while the engine was already running. I couldn't tell it was on!
#556 of 588
replacement tires by cooppoop
Mar 31, 2009 (7:21 pm)
Reply
Anybody tried putting on the potenza grids? I read good things about them and they actually have a mileage warranty.
#557 of 588
Re: belt and engine noise.... [cooppoop] by vg33e power
Apr 01, 2009 (6:25 am)
Reply

Replying to: cooppoop (Mar 31, 2009 7:20 pm)

The tapping noise can be subjective, however, mine has what I would say is a normal range of noise coming from the valves, nothing outrageous or out of the ordinary but definately loud enough to hear lightly.
 
As far as the drivebelt, I also get a whinning noise (not squealing) when it is raining, perhaps from the water that gets the belt wet and makes the noise when going through the pulleys. Once it is dry it goes away completely.
 
What mine does that I don't know if anyone elses does, is a weird whining noise similar to the wet drivebelt from the A/C compressor when first turned on, possible for the first 10-30 seconds. Anyone else experience this???
#558 of 588
Re: belt and engine noise.... [vg33e power] by cooppoop
Apr 01, 2009 (6:47 pm)
Reply

Replying to: vg33e power (Apr 01, 2009 6:25 am)

mine was actually at the dealer today for new tires (a warranty issue) and I asked them to check on the belt noise. They told me it was the Belt for the AC compressor and recommended I change it. I declined the service and will live with the noise. The belt has plenty of life left in it!
#559 of 588
Adding a Backup camera by zoombus
May 10, 2009 (12:54 pm)
Reply
Just a FYI... 2008 GT nav owners..even though the picture on navtools site shows what I expect is the only available nav system in the 5.. the navtool (as well as the other brands) will not work with this head unit. Talked with three different suppliers..short answer is If the map disk goes in behind the screen the only way to add the switcher (navtool, ect.) is to ship your head unit to them so they can make the connections internally. Unfortantly I didnt find this out until I had my entire car apart. (older and wiser). Not comfortable with that so still looking for a work-around. Suggestions?

Messages Page 56 of 59
1
...
53
54
55
56
57
58
59
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement