You are here:
Forums
Sedans
Chevrolet Aveo
Chevy Aveo Modifications

183 messages, Last post on Sep 11, 2009 at 5:31 PM
You are in the Chevrolet Aveo Forum. Your Hosts are pat & karens
| I was wondering how the Ebay Dash kit (the aluminum accents) worked out? | |
|
|
Hello, I have a 2004 Aveo LS hatchback with the tiny 14" wheels and want to upgrade to something bigger. Not suer if I'm ready to spend the dough for mags but want to put a set of 16" or 17" steely's on. I like the look and simplicity of them. Is this possible to find something with the same bolt pattern or would I have to go to mags? Any help would be appreciated. Thanks!
|
|
|
|
|
Replying to: bettysurf14 (Feb 27, 2007 8:41 am) |
|
|
|
Just picked up a slightly used 2006 5 door. I'm looking at putting in remote locks with keyless entry as my model didn't have them. I've done the door job myself on a different car before so I know what's involved regarding wiring and actuator mounting, but am unsure how the hatch lock itself is to be done as it seems different than a door. I don't want a popup action, just want to be able to lock/unlock the hatch at the same time of the doors with the remote. Any suggestions?
|
|
|
Replying to: lead_foot (Jan 19, 2007 10:41 am) |
|
|
Replying to: ltk2 (Mar 15, 2007 5:24 pm) |
|
I HAVE AN 2006 HATCHBACK LT. I HAVE ALREADY PUT A RAM AIR INTAKE FROM SCERET WEAPON R OFF OF RACINGLAB.COM AND IT MADE THE CAR HAVE MORE POWER FROM THE GET GO. IT ALSO MAKES THE ENGINE SOUND GREAT. NEXT I PUT A CARBON FIBER MUFFLER WITH A 4.5 INCH TIP. THE AMOUNT OF TOURQE WAS GREAT AND NOW THE CAR SOUND WONDERFUL. IM WORKING ON GETTING A BOTTLE OF NITOUS FROM NITROUS EXPRESS. ITS ONLY A 35HP SHOT BUT IM SURE IT WILL THROW YOU IN THE SEAT. I HAVE ALSO PUT H&R LOWERING SPRINGS AND 16INCH 6 SPOKE WHEELS AND BFGOODWRENCH G-FORCE Z RATED TIRES ON IT. THE CAR IS FUN. NEXT IS THE CARBON FIBER HOOD, BODY KIT, TINT, AND MOLDED VENT GUARDS. OH AND I PUT A 2000WATT 15 INCH SUBWOOFER IN IT AND IT POUNDS. I HAVE HEARD THAT THERE IS A SUPER CHARGER FOR IT AND THAT WOULD BE MY FINISHING TOUCH BESIDES A BIG BRAKE KITS FOR THE FRONT AND REAR. IF ANY ONE HAS INFORMATION PLESAE SHARE. THANKS A LOT AND ENJOY. YOU KNOW WHAT THEY SAY "ITS MORE FUN TO DRIVE A SLOW CAR FAST, THEN DRIVING A FAST CAR SLOW."
|
|
|
Replying to: arjames (Mar 18, 2007 10:19 pm)
|
|
|
Replying to: flaaveo (Mar 19, 2007 2:18 am) |
|
|
I have a new spicy orange Aveo Hatchback. absolute love the car. I have a set of fog lights and horns for the car. I want to mount the lights in the lower bumper of the car. Since it's a base model, the two holes in the bumper are covered up with black plastic plugs. How the heck do you remove the plastic plugs??!! I found the screws that hold them in place, but just can't get to them, and I have small hands. Do I have to remove the whole bumper assembly??? Now to the horns. How do I know which is the horn wire from the horn button? Any responses from anyone with experience is greatly appreciated. Thanx ---- Paco |
|
You are here:
Forums
Sedans
Chevrolet Aveo
Chevy Aveo Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Aveo



Browse by Board
Browse by Topic
Today's Chats