- #1159 of 1177
-
ground clearance
by mltsurger
-
Oct 19, 2009 (3:48 pm)
-
|
|
Is the ground clearance the same on the 2008.I used to drive a Tahoe and my wife has an Outback.We have a 1/2 mile drive but I also use a plow truck.Every now and then I need to get back in after work before I plow. Will a 7 foot plow fit on the front of the M45X. Thanks
|
- #1160 of 1177
-
Re: ground clearance [mltsurger]
by Mr_Shiftright HOST
-
Oct 19, 2009 (5:48 pm)
-
|
|
Replying to: mltsurger (Oct 19, 2009 3:48 pm)
Yeah same. You wouldn't want to plow with this type of vehicle and drivetrain. It's really not built for it. You need 4X4 with a low range , not AWD.
|
- #1161 of 1177
-
Re: peeling veneer - update [ghstudio]
by infinitisvc
-
Oct 20, 2009 (1:54 am)
-
|
|
Replying to: ghstudio (Oct 09, 2009 9:18 am)
If it has been a while since you have checked with your dealer, you may want to check again. I am a service consultant for a dealer in the Dallas area and we have had the M wood panels in stock with ample supply for a couple of weeks now.
I don't know this for certain, but it looks like the wood panels had a problem in mfg. Hopefully it has been corrected now.
Good luck.
|
- #1162 of 1177
-
Re: peeling veneer - update [infinitisvc]
by ghstudio
-
Oct 20, 2009 (10:32 am)
-
|
|
Replying to: infinitisvc (Oct 20, 2009 1:54 am)
finally had the panel replaced today....
|
- #1163 of 1177
-
Re: peeling veneer - update [ghstudio]
by demarcom
-
Oct 21, 2009 (11:21 am)
-
|
|
Replying to: ghstudio (Oct 20, 2009 10:32 am)
Glad to find this post... I have 2 - 2008 M35x's and both have the problem. One of them is much worse. The back door veneers are just flapping in the wind. Both front doors are warped and peeling. The 2nd car is not as bad and just peeling off. I had these parts on order with Porter Infiniti in DE, and that's been 2 months now, with no end in sight. I guess I will call again...
|
- #1164 of 1177
-
Re: peeling "wood veneer" [infinitisvc]
by kvaillancourt
-
Oct 21, 2009 (7:50 pm)
-
|
|
Replying to: infinitisvc (Oct 06, 2009 7:08 pm)
Thank you so much for your input...I asked my dealer if they would contact your dealer and they REFUSED....I do not want to disrespect you, but this kind of issue was my concern before I bought an Infiniti product. I should have stayed with Lexus. It does not bother me that this happen or their is a delay but the "passing of the buck" that myself and other Infiniti owners are experiencing is not acceptable. I was told by my dealer that they were told unable to obtain part and earliest possible date, NEXT YEAR...Can I buy them from you?
|
- #1165 of 1177
-
'Door wood panels.
by mltsurger
-
Oct 29, 2009 (5:36 pm)
-
|
|
I have a passenger door front with the panel warping and coming off.I called the dealer and 4 days later they have stated the part is in to be replaced.The back -order issue must be resolved.
|
- #1166 of 1177
-
Re: 'Door wood panels. [mltsurger]
by demarcom
-
Nov 01, 2009 (6:06 am)
-
|
|
Replying to: mltsurger (Oct 29, 2009 5:36 pm)
I do believe the supply problem has subsided. I have a scheduled appointment for Nov 6th to have all 4 panels replaced. As to overall quality this is the only issue I have experienced with this M35x...
|
- #1167 of 1177
-
Complaints...Complaints
by j21m
-
Nov 01, 2009 (6:58 am)
-
|
This is such a great car! I owned 3 M-B's previously and my '07 M35 car is superior! Yes I live in Fl and had to replace 2 door panels, but otherwise this car is a gem...Can't wait for the 2011 
|
- #1168 of 1177
-
Re: 'Door wood panels. [mltsurger]
by demarcom
-
Nov 08, 2009 (7:29 am)
-
|
|
Replying to: mltsurger (Oct 29, 2009 5:36 pm)
I just had all 4 replaced on my 08. Service advisor said it's been a problem on all year M's and the 08 panel are the easiest to get. Evidently the 06 and 07 have lots of backorders.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
