Sign In Join 



Chrysler PT Cruiser

105 messages,  Last post on Nov 11, 2009 at 8:34 AM

You are in the Chrysler PT Cruiser Forum. Your Host is kcram

What is this discussion about? Chrysler PT Cruiser, Wagon


Messages Page 9 of 12
1
...
6
7
8
9
10
11
12
Prev
Next
Last
Go To Msg #
Search This Discussion

#72 of 105
Sad day for cruiser fans...PT done in 2010? [micweb] by charlesf4
Sep 12, 2007 (3:27 pm)
Reply

Replying to: micweb (Sep 12, 2007 2:47 pm)

And then there was the VW bug that went on and on. I have often thought about how those people feel that went out and bought the first Cruiser with the out landished mark ups.
 
The first time I saw a Cruiser at the LA Auto Show I knew one day I would have one. I test drove one later and was disappointed because it felt so under powered. I waited around and bought a 2004 GT Turbo. it is a gas hog but I don't care. I love the car!!
#73 of 105
Speed Control/Cruise Control HELP!! by superwoody
Sep 15, 2007 (9:23 pm)
Reply
I have a 2007 PT Cruiser that didn't have cruise from the factory so I ordered the factory speed control kit from Mopar. Everything went fairly well on the install except for a couple of problems of the instructions not showing the correct view. In other words, in one case where it shows to plug 2 wires into a certain plug, there was only room for one! Has anyone here installed a kit in an 07'? Also, does the computer need to be reset/reprogrammed for the cruise, the instructions had ZERO words on it just pictures
 
HELP ANYONE
#74 of 105
Re: Speed Control/Cruise Control HELP!! [superwoody] by krony
Sep 18, 2007 (6:23 pm)
Reply

Replying to: superwoody (Sep 15, 2007 9:23 pm)

No help from your dealer? I'd check with them on some help...especially if it's Mopar parts.
#75 of 105
Re: Speed Control/Cruise Control HELP!! [superwoody] by atuncay
Sep 19, 2007 (10:49 am)
Reply

Replying to: superwoody (Sep 15, 2007 9:23 pm)

I have the exact same problem with the kit I just received. The part number on it is 82209360AB, it shows the incorrect connector configuration on the steering wheel and has the pin numbers reversed on the connector on the firewall.
 
Calls to Mopar have not helped. Have solved your problem?
 
-ahmet
#76 of 105
Re: PT Cruiser CD Player issue [ajc3] by car2star
Jan 05, 2008 (7:12 pm)
Reply

Replying to: ajc3 (Aug 17, 2007 7:36 am)

Hi ajc3, the problem you described just happened to me. 2004 PT cruiser with 25K miles. Battery died and my radio works but does not recognize the CD player in "mode". The dealer said something about a "reset", but said to buy a new radio! Did you ever get an answer? Thanks.
#78 of 105
PT CRUISER CONVERTABLE DUST COVER by wschell
Jan 08, 2008 (10:06 am)
Reply
CAN ANYONE TELL ME IF A DUST COVER FOR A 2006 PT CONVERTABLE WILL FIT A 2007 PT CONVERTABLE.
 
THANKS, BILL
#79 of 105
Re: PT CRUISER CONVERTABLE DUST COVER [wschell] by krony
Jan 09, 2008 (4:33 am)
Reply

Replying to: wschell (Jan 08, 2008 10:06 am)

A dealer should be able to tell you for sure but from what I know due to the major facelift for 2006 there are no differences between any of the 06 and 07 PT's with exception of equipment in the base packages and the "PT Cruiser" decal/emblem going to the rear hatch instead of the doors. That's probably a safe cost reduction .
#80 of 105
Re: I believe....... [m1miata] by carbugs
Jan 23, 2008 (7:59 am)
Reply

Replying to: m1miata (Mar 25, 2006 7:48 pm)

I had a Plymouth Sundance that used 1 quart of oil for every 1000 miles and some other serious problems such as broken air conditioning, paint coming off, stalling and loud squealing noises that made people stare. I took that car to every dealer within a 50 mile radius of my home and it was never fixed. Chrysler finally sent me a letter stating that 1 quart of oil per 1000 miles is "normal". I should have framed that letter, it was hilarious. Took a huge loss on the vehicle.
#81 of 105
Re: Speed Control/Cruise Control HELP!! [superwoody] by russhawley
Feb 09, 2008 (7:54 am)
Reply

Replying to: superwoody (Sep 15, 2007 9:23 pm)

Hi, I was wondering if you resolved your problem and I would also like a copy of the instructions if that is possible. I am a pretty good mechanic but I would like to see what all is involved. Thanks

Messages Page 9 of 12
1
...
6
7
8
9
10
11
12
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement