Toyota Pickup (pre-Tacoma) issues - READ ONLY

460 messages,  Last post on Apr 30, 2009 at 12:07 PM

You are in the Pickups - Archived Discussions Forum.

This discussion is ARCHIVED. To reactivate the discussion, post a request in the Javascript runtime error--TypeError: obj has no properties-- see logJsError345.html for a stack trace discussion.

What is this discussion about? Toyota Pickup, Truck

#427 of 460 Re: 1990 toyota pickup clicking when truned hard [jtill43] by pauliep13

Jul 16, 2008 (8:43 pm)

Replying to: jtill43 (Jul 16, 2008 8:28 pm)
I have no idea how much it might cost. Sorry, by my truck isn't 4WD, so I've never done it. Which means that I can't offer any advice as to how easy or hard it would be.
 
Do a Google search for "1993 Toyota pickup Factory Service Manual" that should link you to an online manual from Toyota that can help a lot. The 1990 and 1993 should all be about the same.
 
Also, www.yotatech.com is another board I frequent. Look it up and use the "search" feature. Search something along the lines of "CV axle replacement".
 
There are MANY people on that board with the same truck/4WD system as yours with MANY tips and tricks for working on them.
 
Hope this helps.

#428 of 460 Re: 1990 toyota pickup clicking when truned hard [pauliep13] by jtill43

Jul 19, 2008 (6:22 pm)

Replying to: pauliep13 (Jul 16, 2008 8:43 pm)
Thanks again for your help

#429 of 460 91 Toyota Pickup Problems by smilehard

Jul 30, 2008 (10:13 am)

I just rebuilt the 22RE in my truck. When I got back into the truck and got it running, it runs for about 5 minutes and then dies. When it starts to sputter, if I keep the RPM's up, it will continue to run until I let off the gas. Thank you for any advice!

#430 of 460 Re: 91 Toyota Pickup Problems [smilehard] by jporter1

Jul 30, 2008 (12:14 pm)

Replying to: smilehard (Jul 30, 2008 10:13 am)
http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/- emotorcons/emo_sick.gif It sounds like a vacuum leak or a fuel blockage. New fuel filter is installed? Check around engine for vacuum leak.http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxi- cons/emotorcons/emo_confused.gif

#431 of 460 Re: toyota parts [toyman812] by redicknuff

Aug 05, 2008 (11:22 am)

Replying to: toyman812 (Jun 29, 2008 11:19 am)
i need an interior driver side door handle (the one you use to close the door when sitting inside) for a 1990 toyota pickup - grey interior - grizzly model, 4WD - 3.0 V6 thanks

#433 of 460 94 22re is acting up by 9422re

Sep 15, 2008 (9:16 pm)

I have a 94 extended cab 4x4 22re. It starts fine when I first start it, but after I drive it 5-10 miles and turn it off sometimes it will not start it drags like the battery is dead. after it sets for about 30 minutes or so it will start just fine. I have replaced battery, battery cables, starter, fuel filter, spark plugs, and changed the oil. it has not helped at all. Nobody seem to know whats causing the problem. Any help would be greatly appreciated. I have not changed the distrib cap. it starts and runs fine has a small miss in it but otherwise runs great. little hard on gas but I have big tires also. I noticed it has developed a large oil leak in the last month or so. its like something is getting hot and having to cool off before the truck will start after being run for longer than 15 minutes. Any suggestions ? short on cash and cant afford to take it to a shop !

#434 of 460 93 auto to manual trans swap by treegrower

Sep 25, 2008 (10:13 am)

New guy here. I am currently on my 7th Toyota truck, 3rd 4wd. This is the first automatic transmission vehicle I have ever owned (since 1964), and drastically need to swap to a manual ! I get only 13 mpg with this 93 SR5, and I got 20 with my 92 SR5 5 sp. I have done these swaps on American made classics (my other truck is a 57 Chevy w/ 350), and know the task is pretty simple, however my mechanic warns me about compatibility of the truck's computer when switching trans.
 
Some questions before I invest in parts:
Are the transfer cases the same from auto to manual?
Any need to change or modify crossmembers when switching to manual?
Are the drive shafts the same length when switching to manual?
Do I need to change computers, or is the auto to manual switch OK since there is no electronic shifting?
Thanks in advance for any advice.

#435 of 460 1992 Pickup 2.4L EFI A/C issue by cwwilson721

Oct 05, 2008 (10:06 am)

My '92 Pickup a/c is constantly on. Due to this, my MPG is more like GPM, and overheating is getting to be a major issue. If I turn off the blower fan, the clutch kicks out, so I'm fairly sure it is a relay issue. But where is it? Or the fuse? I can make some headway if I knew where the $%^&* relay or fuse is at.
 
Any ideas? I've looked in the under-hood box, and drivers side kick panel, and no joy.

#436 of 460 Re: 1992 Pickup 2.4L EFI A/C issue [cwwilson721] by pauliep13

Oct 06, 2008 (7:14 am)

Replying to: cwwilson721 (Oct 05, 2008 10:06 am)
Check the switch. The one on the dashboard that says, "A/C". Might be shorted out internally.
 
Here's a link for the procedure:
 
http://www.ncttora.com/fsm/1993/airconditioning/18acswitch.pdf

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement