Sign In Join 



Simple, inexpensive horsepower/torque upgrades for 95 Chevy C1500

23 messages,  Last post on Oct 19, 2007 at 4:39 PM

You are in the Speed Shop Tuning and Modification Forum. Your Host is steve_

What is this discussion about? Chevrolet C/K 1500 Series, Performance Mods


Messages Page 3 of 3
1
2
3
Prev
Next
Last
Go To Msg #
Search This Discussion

#14 of 23
tourqe/aecleration improvment by jbusch
Nov 25, 2005 (5:34 pm)
Reply
yea waht all do i need to buy and install for my 95 chevy for a tourqe and aceleceration improvment??
#17 of 23
Water leak inside cabin of 95 Chevy K1500 by bena8837
Sep 16, 2006 (5:16 pm)
Reply
I appear to have a water leak inside the cab in the right side right where the heater core is. However, I don't believe it is the heater core that is leaking because there is no antifreeze in the water, so I suspect it is condensation from the A/C. What would cause this and what would I need to do? Any help would be greatly appreciated.
Thanks!
#18 of 23
Re: Water leak inside cabin of 95 Chevy K1500 [bena8837] by steve_ HOST
Sep 16, 2006 (5:20 pm)
Reply

Replying to: bena8837 (Sep 16, 2006 5:16 pm)

I think I'd try asking in the Chevy C/K Series: Problems & Solutions or the Climate Control Problems (Air Conditioning, Heat) - All Cars discussions instead.
#19 of 23
Re: converting 4.3 to a 5.7 in 1990 c1500 [c1500] by crazyrocker
Oct 21, 2006 (10:32 pm)
Reply

Replying to: c1500 (Sep 22, 2005 9:12 am)

i no this is an old message but i really need some help im doin the same thing. i have a 1990 chevy 1500 with a fuel injected 4.3 v-6 and i want to put a 5.7 350 in it.
i can i use the same trans what do ineed to change and what is a good moto to use.
plz email me about this crazy_rocker_69hotmail.com
thanks chris
#20 of 23
ABS Dash Light On! by phelps389
Oct 19, 2007 (2:15 pm)
Reply
My 1990 Chevy C-1500 Pickup's ABS Dash Light has been on steady for 2 weeks now. I looked behind the wheels, for magnetic speed sensors. But could'nt find any.Could it be on the tailshaft of the tranny? The Brake system is fairly New. I have plenty of fluid.And the pedal is not low.
I also checked all Connections to the Abs ECM, and they're clean & dry. Any help would be appreciated! Thanks!
#21 of 23
Re: converting 4.3 to a 5.7 in 1990 c1500 [crazyrocker] by okko1
Oct 19, 2007 (4:34 pm)
Reply

Replying to: crazyrocker (Oct 21, 2006 10:32 pm)

torque converter and starter nose cone must be the same. some gm v6 motors have a smaller flywheel. on frame motor mount position may need to be moved. the holes are already in cradle and may only have 2 mounting match holes. all other cross member mounts and tranny mounts should be the same. use 1 piece accessory bracket. this will give you mounting access for air,steering, and electric with little or no mod of bracket.
#22 of 23
Re: ABS Dash Light On! [phelps389] by okko1
Oct 19, 2007 (4:39 pm)
Reply

Replying to: phelps389 (Oct 19, 2007 2:15 pm)

pull the rotor and see if it has a gear at the rear hub seal check sensor for metal attached at fielding magnet

Messages Page 3 of 3
1
2
3
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement