Sign In Join 



Mazda Miata Problems and Solutions - READ ONLY

372 messages,  Last post on Oct 18, 2006 at 8:46 AM

You are in the Mazda Miata Forum. Your Host is claires

What is this discussion about? Mazda Miata, Mazda MX-5 Miata, Electrical, Engine, Steering, Suspension, Transmission, Convertible


Messages Page 31 of 38
1
...
28
29
30
31
32
33
34
...
38
Prev
Next
Last
Go To Msg #
Search This Discussion

#293 of 372
Re: Front License Plate Holder [lwirth] by erics6
May 18, 2006 (8:23 am)

Replying to: lwirth (May 18, 2006 8:12 am)

No MSM for me, although I wouldn't mind one. I own a 93 like juice. I owned a 99, but prefer the original Miata. I feel sorry for people trying to sell the MSM's... They're asking $20k+ and I've seen dealers asking around $17k.
 
The NB (99-05) seem to be undervalued, while the NA (90-97) are maintaining their value. I guess it's supply and demand. Fewer of the older ones around, and still a good supply of the newer ones.
#294 of 372
Re: Front License Plate Holder [erics6] by ateixeira
May 18, 2006 (8:29 am)

Replying to: erics6 (May 18, 2006 8:23 am)

New ones are cheap. I wish I needed to buy one!
 
My '93 is fine, the hesitation/stutter is gone after I put in new wires and plugs.
 
Neat little license plate idea. I'm not sure I'd want mine to swing like that, but still.
 
-juice
#295 of 372
Re: Mazda Miata Owners: Problems & Solutions [KarenS] by tom5942
May 30, 2006 (8:39 am)

Replying to: KarenS (Mar 29, 2005 6:41 am)

Can anyone tell me how to change the bulb in the fog lamp of a 2000 Miata LS. I can't see where to get access to the lamp, unless it is from under the car.
#296 of 372
Re: Mazda Miata Owners: Problems & Solutions [tom5942] by ateixeira
May 30, 2006 (9:08 am)

Replying to: tom5942 (May 30, 2006 8:39 am)

Don't know, but my guess would be from the bottom and behind the bumper, there must be access to it. Just follow the wires.
 
-juice
#297 of 372
MX5 Car Wash recommendation by tnb
Jun 10, 2006 (3:02 pm)
Hi there,
 
my new MX5 GT is looking quite dirty after a few week-end trips in the mountain, and I was wondering what kind of Car Wash experience you guys may have had with your convertible. The manual specifically recommends not using automatic car wash, and I also don't want my leather seats ruined by a cheap shop employee. Also, is car waxing needed, and how often ?
I am in the LA coastal region.
Thanks in advance.
TNB
#298 of 372
Repairing Paint Chips on the Front Bumper by lwirth
Jun 13, 2006 (1:02 pm)
I would appreciate any recommendations for fixing paint chips on the front bumper of a 2002 Miata SE. I know that the paint code is 26S but don't want the repair to look even worse than it already does. I also have paint dings behind the front license plate due to poor Mazda design, but will probably let them go for now. Thanks for your advice. LRW
#299 of 372
Re: Repairing Paint Chips on the Front Bumper [lwirth] by ateixeira
Jun 13, 2006 (1:56 pm)

Replying to: lwirth (Jun 13, 2006 1:02 pm)

I flipped my license plate holder upside down, so that it bends away from the bumper instead of towards it. It look a hammer and some elbow grease, plus it's mounted lower now.
 
-juice
#300 of 372
Re: Repairing Paint Chips on the Front Bumper [ateixeira] by lwirth
Jun 13, 2006 (2:04 pm)

Replying to: ateixeira (Jun 13, 2006 1:56 pm)

Juice, I got a new plate holder on the internet which is much better than the standard Miata holder, but --- do you have any advice on repairing the paint chips that I can still see on the front bumper. My Miata SE has blazing yellow mica metallic clearcoat, code 26S paint and I want to do something that will blend in with the metallic paint and not look bad. Thanks LRW
#301 of 372
Re: Repairing Paint Chips on the Front Bumper [lwirth] by erics6
Jun 13, 2006 (2:24 pm)

Replying to: lwirth (Jun 13, 2006 2:04 pm)

Chips are tough... I've done it, but it doesn't look perfect. There are plenty of "how to" touch up websites out there. If you want it perfect, you'll have to get it repainted. Good luck.
#302 of 372
Re: Repairing Paint Chips on the Front Bumper [lwirth] by erics6
Jun 13, 2006 (2:30 pm)

Replying to: lwirth (Jun 13, 2006 2:04 pm)

Here's a how-to site.
 
http://www.carcareonline.com/viewarticle.aspx?art=8

Messages Page 31 of 38
1
...
28
29
30
31
32
33
34
...
38
Prev
Next
Last
Go To Msg #
Search This Discussion

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement