Engine Swaps

471 messages, Last post on Oct 13, 2009 at 9:26 PM

You are in the Speed Shop Tuning and Modification Forum. Your Host is steve_

What is this discussion about? Engine

This forum is to ask questions or enjoy bragging rights about swapping out your stock engine for a more powerful one, be it the same make or from another make of car. This forum is NOT for descriptions of replacing same with same merely to replace a blown up motor. Use the Maintenance & Repair Board for that kind of swap.

Outline

Messages Page 48 of 48: 1; ...; 42; 43; 44; 45; 46; 47; 48; Prev; Next; Last

#468 of 471 96 ranger v6 to 97 explorer 302 by inject Aug 05, 2009 (7:30 pm)
I need any and all help with my ranger V8 conversion.I have a 96 ford ranger im trying to put a 97 Explorer 302 in it.Im running into clearace issues putting the engine in.I bought different motor mounts for a mustang cov. I also have the double sump oil pan off a mustang.Im using the mountaineer tranny with transfer case. I origanally wanted to use the transfer case that I took off but it uses 5 bolts to bolt to the tranny. so i had to use the mountaineer transfer case that is four wheel drive all the time .Im still not having sucsess matching the engine with the motor mounts i bought.Any feedback is appreciated
#469 of 471 Just wondering by rregardless Aug 16, 2009 (6:08 am)
Can a 4A-GZE engine from a corolla fit into at 91 toyota tercel?
#471 of 471 1988 isuzu trooper II engine questions by mpm55 Oct 13, 2009 (9:26 pm)
i have a 1988 trooper and I wanted to swap the 2.6 v4 for something more powerful, perhaps a 3.2 V6. i wwas wondering what would mate with the current transmission it already has in it. would putting a3.2 require ALOT of remodeling of the engine mounting brakets and what not? any ideas? thoughts appriciated, thank you.