Engine Swaps

471 messages, Last post on Oct 13, 2009 at 9:26 PM

You are in the Speed Shop Tuning and Modification Forum. Your Host is steve_

What is this discussion about? Engine

This forum is to ask questions or enjoy bragging rights about swapping out your stock engine for a more powerful one, be it the same make or from another make of car. This forum is NOT for descriptions of replacing same with same merely to replace a blown up motor. Use the Maintenance & Repair Board for that kind of swap.

Outline

Messages Page 48 of 48: 1; ...; 42; 43; 44; 45; 46; 47; 48; Prev; Next; Last

#463 of 471 Engine swaps by error Jun 10, 2009 (10:34 am)
How can I find out if an engine from a 1998 Ford Ranger 3.0 V6 with Auto Transmission fit into a 1993 Ford Ranger with 2.3L I-4 with 5sp trans.
#464 of 471 1994 rodeo engine swap by junebug13 Jun 19, 2009 (10:43 am)
i am putting engine out of 1994 3.2 into 1997 3.2 body can any body tell me if the wireing harnace will work one has the coil packs no each plugs and the other has coilpacks on top of engine what kind of problems am i faceing . please help jc
#465 of 471 Can a 02 Kia Sedona engine fit in a 03 kia SORENTO? by jokingjosh Jul 08, 2009 (9:45 am)
I was told that an 02 Kia Sedona engine would fit in 03 Kia Sorento. It would require me to switch out the exhaust manifold. Is there any other install issues that I need to know about before I attempt this job. Such as motor mounts, sensors etc.
#466 of 471 4.2 L Envoy motor into a 51 GMC 1/2T by jliot Jul 10, 2009 (4:49 pm)
Guys, Don't know if this is the right place for info, but here goes: I have a 4.2 l (I-6) Envoy motor that I will be fitting into a 1/2T GMC pick-up. The problem I have run into is that the Envoy 6 cyl motor has a unique 8 bolt pattern to connect the flex plate to the flywheel. Normally, this would be no problem except I want to put in a standard transmission. I want/need some transmission speed sensors to keep the computer happy and I really want a transmission whose case will closely bolt up to the 4.2 motor. I have narrowed it down to an Aisin 5 speed from a Canyon or Colorado. Hopefully, the flywheel will interchange and the trans case will bolt up. I know that this transmission is a bit light on the torque requirements, but I am a fairly modest driver. Can any of you offer me any help on this project? I am committed to do this, so please don't give me any "can't be done" replies. Thanks for your help. Jeff
#468 of 471 96 ranger v6 to 97 explorer 302 by inject Aug 05, 2009 (7:30 pm)
I need any and all help with my ranger V8 conversion.I have a 96 ford ranger im trying to put a 97 Explorer 302 in it.Im running into clearace issues putting the engine in.I bought different motor mounts for a mustang cov. I also have the double sump oil pan off a mustang.Im using the mountaineer tranny with transfer case. I origanally wanted to use the transfer case that I took off but it uses 5 bolts to bolt to the tranny. so i had to use the mountaineer transfer case that is four wheel drive all the time .Im still not having sucsess matching the engine with the motor mounts i bought.Any feedback is appreciated
#469 of 471 Just wondering by rregardless Aug 16, 2009 (6:08 am)
Can a 4A-GZE engine from a corolla fit into at 91 toyota tercel?
#471 of 471 1988 isuzu trooper II engine questions by mpm55 Oct 13, 2009 (9:26 pm)
i have a 1988 trooper and I wanted to swap the 2.6 v4 for something more powerful, perhaps a 3.2 V6. i wwas wondering what would mate with the current transmission it already has in it. would putting a3.2 require ALOT of remodeling of the engine mounting brakets and what not? any ideas? thoughts appriciated, thank you.