Ask the Car People.SM


Engine Swaps

486 messages,  Last post on Jun 02, 2012 at 3:33 PM

You are in the Speed Shop Tuning and Modification Forum.

What is this discussion about? Engine

This forum is to ask questions or enjoy bragging rights about swapping out your stock engine for a more powerful one, be it the same make or from another make of car. This forum is NOT for descriptions of replacing same with same merely to replace a blown up motor. Use the Maintenance & Repair Board for that kind of swap.
 

Messages Page 47 of 50

#455 of 486 Re: I've seen several very well [driftracer] by maverickj

Jun 03, 2008 (10:33 am)

Replying to: driftracer (Apr 20, 2005 2:14 pm)
Yeah, I have seen couple of 240SX with 350 Engine Mods in them at car show. It's a lot of work but turns out great.
Later.

#456 of 486 engine swap by darts1

Oct 26, 2008 (4:31 pm)

i have a 87 bronco11 with 2.9 v6 what engine interchanges with it without changein the aoto tranny plz e mail me at darts56hotmail.com thanks

#458 of 486 cam identification by bullboy

Feb 28, 2009 (12:56 pm)

I recently had some as***** who broke into my garage and stoled my carb,dist,intake and all the chrome off my engine. I had this engine built for me and I do not remember what cam it has and I would like to mach everything up. So I would like to know is there any way I can tell what cam it is without pulling it out . I would appreciate any input
Thank you

#459 of 486 Is this possible?? by dtbird

Apr 06, 2009 (2:06 pm)

I posted this same question on a different board in this forum, then I saw the title "engine swap" & thought I should post it here.
Anyway my question is, would it be possible to put a fuel injected 5.0 from an '86 Grand Marquis (actually I put this motor in & the guy I bought it from said it was out of a T-Bird or a Mustang) and put that motor in a '86 T-Bird with a throttle body injected 3.8?
What do ya think????

#460 of 486 honda?Gm engine swap by cliff85j

May 07, 2009 (2:59 pm)

I have a 2000 honda passport with a 3.2L V6 that has some maintenance problems. I also have a 91 Chevy pickup with a 4.3L V6 and am thinking puting the 4.3L inth the Honda. I was wondering if anyone knows how hard it will be to match the engine the the transmission, computer, wiring etc. Both vehicle are manual trans. Or am I better off looking for another Isuzu engine? I know Isuzu makes a 4.3L V6. The Honda passport was manufactured by Isuzu for honda.

#461 of 486 Re: isuzu rodeo v8 swap???'s [jtdesigns] by oreocreaming

Jun 01, 2009 (10:16 am)

Replying to: jtdesigns (Feb 03, 2007 11:02 pm)
if you have any questions your more then welcome to e mail me at oreocreamingyahoo.com. ive got a 350 in my 92 rodeo. simple swap.

#462 of 486 Re: isuzu rodeo v8 swap???'s [oreocreaming] by steve_ HOST

Jun 01, 2009 (11:34 am)

Replying to: oreocreaming (Jun 01, 2009 10:16 am)
Please don't ask for or offer to give "personal" help via email. We all benefit when a problem is discussed on the open forum. Thanks.

#463 of 486 Engine swaps by error

Jun 10, 2009 (11:34 am)

How can I find out if an engine from a 1998 Ford Ranger 3.0 V6 with Auto Transmission fit into a 1993 Ford Ranger with 2.3L I-4 with 5sp trans.

#464 of 486 1994 rodeo engine swap by junebug13

Jun 19, 2009 (11:43 am)

i am putting engine out of 1994 3.2 into 1997 3.2 body can any body tell me if the
wireing harnace will work one has the coil packs no each plugs and the other has coilpacks on top of engine what kind of problems am i faceing .
 
please help jc

Messages Page 47 of 50

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement