Ask the Car People.SM


Engine Swaps

486 messages,  Last post on Jun 02, 2012 at 3:33 PM

You are in the Speed Shop Tuning and Modification Forum.

What is this discussion about? Engine

This forum is to ask questions or enjoy bragging rights about swapping out your stock engine for a more powerful one, be it the same make or from another make of car. This forum is NOT for descriptions of replacing same with same merely to replace a blown up motor. Use the Maintenance & Repair Board for that kind of swap.
 

Messages Page 47 of 50

#452 of 486 engine swap ? by schwhack

May 24, 2008 (7:26 pm)

hey everyone,im doin an engine swap from a 96 rs 2.2 4-speed auto to a 97 rs 2.2 3-speed auto car. does anyone know what all is involved in doin the swap,as far as electronics and shifter linkage type stuff. whould it be easier or better to change transmissions on the motors? im not sure the 3 speed trans is good.i have both cars side by side.
i would appreciate any helpful info.

#453 of 486 Re: engine swap ? [schwhack] by paisan

Jun 01, 2008 (8:10 am)

Replying to: schwhack (May 24, 2008 7:26 pm)
what kind of car?
 
-mike

#454 of 486 Re: engine swap ? [paisan] by schwhack

Jun 03, 2008 (4:46 am)

Replying to: paisan (Jun 01, 2008 8:10 am)
its a cavalier,ive already got it swapped.had to change the trans,axles,shifter,shifter cable,engine bay harness and the ecu.

#455 of 486 Re: I've seen several very well [driftracer] by maverickj

Jun 03, 2008 (10:33 am)

Replying to: driftracer (Apr 20, 2005 2:14 pm)
Yeah, I have seen couple of 240SX with 350 Engine Mods in them at car show. It's a lot of work but turns out great.
Later.

#456 of 486 engine swap by darts1

Oct 26, 2008 (4:31 pm)

i have a 87 bronco11 with 2.9 v6 what engine interchanges with it without changein the aoto tranny plz e mail me at darts56hotmail.com thanks

#458 of 486 cam identification by bullboy

Feb 28, 2009 (12:56 pm)

I recently had some as***** who broke into my garage and stoled my carb,dist,intake and all the chrome off my engine. I had this engine built for me and I do not remember what cam it has and I would like to mach everything up. So I would like to know is there any way I can tell what cam it is without pulling it out . I would appreciate any input
Thank you

#459 of 486 Is this possible?? by dtbird

Apr 06, 2009 (2:06 pm)

I posted this same question on a different board in this forum, then I saw the title "engine swap" & thought I should post it here.
Anyway my question is, would it be possible to put a fuel injected 5.0 from an '86 Grand Marquis (actually I put this motor in & the guy I bought it from said it was out of a T-Bird or a Mustang) and put that motor in a '86 T-Bird with a throttle body injected 3.8?
What do ya think????

#460 of 486 honda?Gm engine swap by cliff85j

May 07, 2009 (2:59 pm)

I have a 2000 honda passport with a 3.2L V6 that has some maintenance problems. I also have a 91 Chevy pickup with a 4.3L V6 and am thinking puting the 4.3L inth the Honda. I was wondering if anyone knows how hard it will be to match the engine the the transmission, computer, wiring etc. Both vehicle are manual trans. Or am I better off looking for another Isuzu engine? I know Isuzu makes a 4.3L V6. The Honda passport was manufactured by Isuzu for honda.

#461 of 486 Re: isuzu rodeo v8 swap???'s [jtdesigns] by oreocreaming

Jun 01, 2009 (10:16 am)

Replying to: jtdesigns (Feb 03, 2007 11:02 pm)
if you have any questions your more then welcome to e mail me at oreocreamingyahoo.com. ive got a 350 in my 92 rodeo. simple swap.

Messages Page 47 of 50

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement