Sign In Join 



Nissan 300ZX

315 messages,  Last post on Aug 18, 2009 at 11:47 PM

You are in the Nissan 300ZX Forum. Your Host is claires

What is this discussion about? Nissan 300ZX, Coupe

This forum is for anyone interested in the 300ZX, all years and variations.


Messages Page 16 of 32
1
...
13
14
15
16
17
18
19
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion

#150 of 315
loss of power in my 350zx by ts1508
Jan 30, 2007 (8:04 pm)
Reply
I have a non turbo 92 350zx I spayed engine de-greaser and water on my motor today when I drove it a while later the motor started missing and had a loss of power it seems to to idle a little rough also. I think maybe I got somthing electrical wet maybe distribution system not really sure any help, suggestions, tips, or help would be great thanks
#152 of 315
cuts out at 2500 rpm by 84_300zx
Feb 05, 2007 (12:39 pm)
Reply
i got a 1984 300 zx non turbo and i cant get it to rev up past 2500 rpm. It idals good and runs great tell it gets to 2500 rpm then it seems like the fuel system suts down or somithing. was wondering if anyone can help thanks
#153 of 315
1986 nissan 300zx trouble by goathead1
Feb 08, 2007 (7:17 pm)
Reply
Basically, the clutch is messed up. It was working fine up until it just stuck in place. I bleed the fluid and made sure there were no air pockets in the fluid line but that didnt work. Now the clutch bar acts like it has a suction in the line and no longer compresses. Help?
#154 of 315
Re: cuts out at 2500 rpm [84_300zx] by goathead1
Feb 08, 2007 (7:19 pm)
Reply

Replying to: 84_300zx (Feb 05, 2007 12:39 pm)

try cleaning the spark plugs.
#155 of 315
Re: cuts out at 2500 rpm [goathead1] by 84_300zx
Feb 09, 2007 (3:50 pm)
Reply

Replying to: goathead1 (Feb 08, 2007 7:19 pm)

ok i will try that tonight and get back with ya to let ya know if it worked tnx
#156 of 315
Swapping a Jap engine by sk8ordie778
Feb 10, 2007 (1:09 pm)
Reply
I was curious if anyone knew if the engine bays of the
300zx +2 and the 300zxTT were the same size. Because Im thinking of swapping a japanese 300zxTT into a 300zx +2 does anyone know if this is possible?
#157 of 315
Re: cuts out at 2500 rpm [goathead1] by 84_300zx
Feb 13, 2007 (9:53 am)
Reply

Replying to: goathead1 (Feb 08, 2007 7:19 pm)

cleaning the spark plugs didnt work think it might be the cat
#158 of 315
Re: cuts out at 2500 rpm [84_300zx] by 84_300zx
Feb 19, 2007 (6:34 pm)
Reply

Replying to: 84_300zx (Feb 13, 2007 9:53 am)

Hay i think it was the mass air flow senser what is the interchange on them. found some on ebay but need to know if a turbo and a N/A one will interchange
#159 of 315
Re: cuts out at 2500 rpm [84_300zx] by dmartin_1
Feb 23, 2007 (1:26 pm)
Reply

Replying to: 84_300zx (Feb 13, 2007 9:53 am)

Mine cuts out at 2500 also Ive replaced MAF ,Fuel pump ,fuel filter.Air breather pulled cat.It idel real nice up to 2500 RPm link">

Messages Page 16 of 32
1
...
13
14
15
16
17
18
19
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement