Last post on Apr 20, 2013 at 7:40 PM
You are in the Nissan 300ZX
What is this discussion about?
Nissan 300ZX, Coupe
This forum is for anyone interested in the 300ZX, all years and variations.
#149 of 336 Re: Need advice: looking to buy a Nissan 300zx tt [tap3009]
Jan 24, 2007 (6:39 pm)
sorry guys new to the site and cant figure out how to post a new question so i figured i would just reply to another and hope to get an answer. I have a 1994 300zx and am experiencing alot of steering wheel shaking at speeds over 60mph and during breaking, any idea what it may be. I just had the tires balanced about a month ago, is it possible the weight may have fallen off??
#150 of 336 loss of power in my 350zx
Jan 30, 2007 (8:04 pm)
I have a non turbo 92 350zx I spayed engine de-greaser and water on my motor today when I drove it a while later the motor started missing and had a loss of power it seems to to idle a little rough also. I think maybe I got somthing electrical wet maybe distribution system not really sure any help, suggestions, tips, or help would be great thanks
#152 of 336 cuts out at 2500 rpm
Feb 05, 2007 (12:39 pm)
i got a 1984 300 zx non turbo and i cant get it to rev up past 2500 rpm. It idals good and runs great tell it gets to 2500 rpm then it seems like the fuel system suts down or somithing. was wondering if anyone can help thanks
#153 of 336 1986 nissan 300zx trouble
Feb 08, 2007 (7:17 pm)
Basically, the clutch is messed up. It was working fine up until it just stuck in place. I bleed the fluid and made sure there were no air pockets in the fluid line but that didnt work. Now the clutch bar acts like it has a suction in the line and no longer compresses. Help?
#154 of 336 Re: cuts out at 2500 rpm [84_300zx]
Feb 08, 2007 (7:19 pm)
try cleaning the spark plugs.
#155 of 336 Re: cuts out at 2500 rpm [goathead1]
Feb 09, 2007 (3:50 pm)
ok i will try that tonight and get back with ya to let ya know if it worked tnx
#156 of 336 Swapping a Jap engine
Feb 10, 2007 (1:09 pm)
I was curious if anyone knew if the engine bays of the
300zx +2 and the 300zxTT were the same size. Because Im thinking of swapping a japanese 300zxTT into a 300zx +2 does anyone know if this is possible?
#157 of 336 Re: cuts out at 2500 rpm [goathead1]
Feb 13, 2007 (9:53 am)
cleaning the spark plugs didnt work think it might be the cat
#158 of 336 Re: cuts out at 2500 rpm [84_300zx]
Feb 19, 2007 (6:34 pm)
Hay i think it was the mass air flow senser what is the interchange on them. found some on ebay but need to know if a turbo and a N/A one will interchange