You are here:
Forums
Coupes & Convertibles
Nissan 300ZX
Nissan 300ZX

317 messages, Last post on Dec 02, 2009 at 1:40 AM
You are in the Nissan 300ZX Forum. Your Host is claires
This forum is for anyone interested in the 300ZX, all years and variations.
|
Replying to: steve86zx (Apr 19, 2006 3:22 pm) Thanks Mike |
|
|
Replying to: my_300 (Apr 20, 2006 5:55 am) |
|
| I have a 1988 300ZX and the headlights flip up but will not flip down. I replaced the motors and same problem. n Does anyone have any answers? | |
|
|
| Are we seeing an uptick in interest in the '84-'89 generation Zs in the marketplace? | |
|
|
| i bought my '93 non turbo 300zx a month ago and it was basically problem free and is now going thru some things....i was wondering if anyone could offer any words of wisdom....when starting theres a loud noise, it almost sounds like a grinding you get from a missed shift or something and it comes from the driver's side of the front end...i've read a few things about faulty fuel injectors in this model and i was wondering if that could be it or if anyone has had this problem...im really looking for answers and help because i know how expensive things can get with this car and i dont want to cause anymore damage..... | |
|
Replying to: claires (Apr 20, 2006 8:54 am) Thanks for the heads up regarding the other group. I've been busy and have not had a chance check back in or reply. I have everything fixed. The blower problem was a voltage controlled resistor between the blower motor and the ground. It is $140 at the dealer. I have a temporary fix. I bypassed the resistor and ran wire to ground on one the mounting bolts. Now the blower start when I start the car. I went ahead and flushed the system then converted to R134. Also fixed the electric window buttons. The factory said they wanted $228 for a replacement so I opened them up and cleaned the contacts with a strip of 400 sand paper. Now they work like new. Steve |
|
| Hi, I need something cleared up about at 1990 300zx, 2 seat non-turbo. I need to know whether these cars use distributor caps or something else. I have a dead cylinder or so i suspect and i need to track the ignition wire from the number 3 coil back to either the distributor rotor or whatever there is in its place. Please Help! Thanks! | |
| i just bought a 1984 300ZX turbo for a project car. the turbo in it is blown, what other turbos will fit. i'm looking for something cheep. any information would be helpful. thank you. | |
You are here:
Forums
Coupes & Convertibles
Nissan 300ZX
Nissan 300ZX
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
1996 Nissan 300ZX



Browse by Board
Browse by Topic
Today's Chats