Sign In Join 



Nissan 300ZX

315 messages,  Last post on Aug 18, 2009 at 11:47 PM

You are in the Nissan 300ZX Forum. Your Host is claires

What is this discussion about? Nissan 300ZX, Coupe

This forum is for anyone interested in the 300ZX, all years and variations.


Messages Page 13 of 32
1
...
10
11
12
13
14
15
16
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion

#119 of 315
Re: 86 300zx Aic conditioner [steve86zx] by claires HOST
Apr 20, 2006 (8:54 am)
Reply

Replying to: steve86zx (Apr 19, 2006 3:19 pm)

steve86zx, have you tried the Climate Control Problems (Air Conditioning, Heat) - All Cars topic in our Maintenance & Repair Forum? The folks there might have some input that you can use.
#122 of 315
Re: Starting Problem 1993 300ZX (non turbo) [steve86zx] by corvette8
Apr 21, 2006 (6:55 am)
Reply

Replying to: steve86zx (Apr 19, 2006 3:22 pm)

Thanks for the reply Steve! Now it is taking its time to start (turning over several seconds before starting), and the problem with the smothering out has stopped. Can you tell me where to find the Air Flow Sensor...not sure where it is located.
Thanks
Mike
#123 of 315
Re: back firing.....? :'( (nissan 300zx 1984 non turbo) [my_300] by my_300
Apr 22, 2006 (8:04 pm)
Reply

Replying to: my_300 (Apr 20, 2006 5:55 am)

BINGO!! found the problem. it was only the lead from the coil to the dizzy
#124 of 315
Headlights by csmiley
Apr 23, 2006 (4:54 am)
Reply
I have a 1988 300ZX and the headlights flip up but will not flip down. I replaced the motors and same problem. n Does anyone have any answers?
#125 of 315
? by hpmctorque
Apr 24, 2006 (5:39 am)
Reply
Are we seeing an uptick in interest in the '84-'89 generation Zs in the marketplace?
#126 of 315
problem with my ZX.... by slidewayz85
Apr 26, 2006 (11:59 am)
Reply
i bought my '93 non turbo 300zx a month ago and it was basically problem free and is now going thru some things....i was wondering if anyone could offer any words of wisdom....when starting theres a loud noise, it almost sounds like a grinding you get from a missed shift or something and it comes from the driver's side of the front end...i've read a few things about faulty fuel injectors in this model and i was wondering if that could be it or if anyone has had this problem...im really looking for answers and help because i know how expensive things can get with this car and i dont want to cause anymore damage.....
#127 of 315
Re: 86 300zx Aic conditioner [claires] by steve86zx
May 06, 2006 (3:50 am)
Reply

Replying to: claires (Apr 20, 2006 8:54 am)

Claires,
 
Thanks for the heads up regarding the other group. I've been busy and have not had a chance check back in or reply. I have everything fixed. The blower problem was a voltage controlled resistor between the blower motor and the ground. It is $140 at the dealer. I have a temporary fix. I bypassed the resistor and ran wire to ground on one the mounting bolts. Now the blower start when I start the car. I went ahead and flushed the system then converted to R134.
 
Also fixed the electric window buttons. The factory said they wanted $228 for a replacement so I opened them up and cleaned the contacts with a strip of 400 sand paper. Now they work like new.
 
Steve
#128 of 315
Distributor Cap? by jkcizbck
May 08, 2006 (6:23 pm)
Reply
Hi, I need something cleared up about at 1990 300zx, 2 seat non-turbo. I need to know whether these cars use distributor caps or something else. I have a dead cylinder or so i suspect and i need to track the ignition wire from the number 3 coil back to either the distributor rotor or whatever there is in its place. Please Help! Thanks!

Messages Page 13 of 32
1
...
10
11
12
13
14
15
16
...
32
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement