You are here:
Forums
SUVs
Ford Explorer
Ford Explorer Mercury Mountaineer 2006 and newer

841 messages, Last post on Nov 24, 2009 at 10:05 AM
You are in the Ford Explorer Forum. Your Hosts are steve_ & tidester
|
Hawaii is also one of the smaller States in the nation. The Big Island is about the size of Connecticut and has fairly few paved roads. OTOH an AWD BMW station wagon handles snow just fine and gets about 28 mpg on the highway and 22 mpg in the city. The Subaru is probably similar. I am guessing that as gas prices continue to rise, Explorer sales will continue to fall and a higher percentage of Explorer buyers will actually need the truck features the Explorer provides. It wouldn't shock me if the Mercury clone was eventually discontinued. They don't sell very many of them right now. OTOH there is that rumor that the next Explorer will be more of a crossover than a traditional SUV. |
|
|
Replying to: adgrant (Aug 05, 2007 4:31 pm)
|
|
|
Replying to: nvbanker (Aug 06, 2007 9:06 am) Body-on-frame is necessary for good tow ratings.
|
|
|
Replying to: mschmal (Aug 06, 2007 12:09 pm) Admitted, things may have been reversed by ARM since he took over, like the Panther car demise, the Taurus demise, perhaps he saved the Explorer also. |
|
|
Replying to: mschmal (Aug 06, 2007 12:09 pm) BTW My father used to two a largish Gulfstream style trailer (slept 5 people) around Europe behind a 2.5 liter RWD car. |
|
|
Replying to: sacmtnr (Apr 03, 2007 12:47 pm)
|
|
|
Replying to: kc459dl (Aug 15, 2007 8:38 am) To Reset Merc Oil life..... Use Reset button on Right of Steering wheel System check CHANGE OIL SOON/OIL CHANGE REQUIRED. Displayed when the engine oil life remaining is 5 percent or less. When oil life left is between 5% and 0%, the CHANGE OIL SOON message will be displayed. When oil life left reaches 0%, the OIL CHANGE REQUIRED message will be displayed. An oil change is required whenever indicated by the message center. USE ONLY RECOMMENDED ENGINE OILS. To reset the oil monitoring system to 100% after each oil change [approximately 8,000 km (5,000 miles) or 180 days] perform the following: 1. Press the SETUP control to access the System Check function. 2. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 3. Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”. 4. Press and hold the RESET control to display OIL LIFE SET TO 100%. Your oil life is now reset. To reset the oil monitoring system to your personalized oil life %: 1. Press the SETUP control to access the System Check function. 2. Press and release the RESET control to display “OIL LIFE XX% HOLD RESET NEW”. 3. Press and hold the RESET control for 2 seconds to display “IF NEW OIL HOLD RESET”. 4. Release the RESET control momentarily, then press RESET and SETUP controls at the same time to activate a service mode which will display OIL LIFE XX% RESET TO ALTER. 5. Press RESET until you find your personalized OIL LIFE XX%. 6. With your personalized OIL LIFE XX% displayed, press SETUP to continue the system check. Instrumentation
|
|
|
Replying to: oluade76 (Aug 15, 2007 1:44 pm)
|
|
|
Replying to: kc459dl (Aug 16, 2007 3:19 am) |
|
|
Replying to: sacmtnr (Jul 28, 2007 10:58 am)
|
|
You are here:
Forums
SUVs
Ford Explorer
Ford Explorer Mercury Mountaineer 2006 and newer
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Mercury Mountaineer
2010 Ford Explorer



Browse by Board
Browse by Topic
Today's Chats