- #4049 of 4062
-
Re: DeBadging [areza1]
by eod132
-
Oct 22, 2009 (10:55 pm)
-
|
|
Replying to: areza1 (May 31, 2006 1:18 pm)
I have just read your post regarding the removal of badges and there was a reference to replacing the grill on the Azera. Would you please send me the link to how to remove and replace the grill or advise me on what to do. I have just ordered a 2009 Azera (Grandeur in Australia) and intend replacing the grill. Many thanks Mike
|
- #4050 of 4062
-
Re: DeBadging [eod132]
by SilverBullet00
-
Oct 24, 2009 (11:34 am)
-
|
|
Replying to: eod132 (Oct 22, 2009 10:55 pm)
To bad you are not closer to me because I am ready to order a 2009-10 OEM grill for my 2008. I really think the new grill is much better looking than the 2006-2008 designed grill, especially on a black car. I will also replace the flying "H" badge with a Luxury badge set from KAI. I did a dry run on the grill removal this past weekend and this what I found out. 1. Need to remove 6 screws that hold the air intake on top of radiator. 2. Remove 4 screws that hold cover over the hood lock assy. 3. Remove 10mm bolts on each side of headlilght assy. The bumper will now flex enough that you can get your hand behind the grill and remove the 7 screws (same size as 4 that hold cover over hood lock) Tools you will need are 10mm socket/wrench, small tip cross/phillips screwdriver or bits that can be used with a small ratchet or whatever tool you prefer. The screws are very small and once started can be removed with your fingers. I'm over 74 years young and if I can do it, I'm sure you can also do it. If you just want to get rid of the flying "H' you might want to look at some of the badges that are available and save alittle money. Let us know how it goes. Anyone out there, jump in and add to my ideas and removal procedure.
|
- #4051 of 4062
-
Azera Badges
by bmb1767
-
Oct 26, 2009 (4:21 am)
-
|
|
Is the flying "H" hard to remove?
|
- #4052 of 4062
-
Re: Azera Badges [bmb1767]
by SilverBullet00
-
Oct 26, 2009 (6:29 am)
-
|
|
Replying to: bmb1767 (Oct 26, 2009 4:21 am)
Try doing a search on Badges or emblems or debadging and you should find your answer.
|
- #4053 of 4062
-
Re: Azera Badges [bmb1767]
by 101649
-
Oct 26, 2009 (3:57 pm)
-
|
|
Replying to: bmb1767 (Oct 26, 2009 4:21 am)
It has 2 plastic anchors that you'll have to pry loose from the back of the grill.
|
- #4054 of 4062
-
Re: Azera Badges [101649]
by bmb1767
-
Oct 27, 2009 (4:35 am)
-
|
|
Replying to: 101649 (Oct 26, 2009 3:57 pm)
I searched on Google for these badges and nothing came up. Any one know where I could look at the different ones available?
|
- #4055 of 4062
-
Re: Azera Badges [bmb1767]
by lightfootfl
-
Oct 27, 2009 (5:58 am)
-
|
|
Replying to: bmb1767 (Oct 27, 2009 4:35 am)
Try searching here in the forums.
van
|
- #4056 of 4062
-
Re: Azera Badges [lightfootfl]
by SilverBullet00
-
Oct 27, 2009 (6:49 am)
-
|
|
Replying to: lightfootfl (Oct 27, 2009 5:58 am)
Here is where the badges are listed: www:koreanautoimports.com or www:kdmstuff.com. At KAI they are all over the website, ie: Azera and emblems and specials, about 5-6 different styles.
|
- #4057 of 4062
-
Re: Azera Badges [SilverBullet00]
by bmb1767
-
Oct 27, 2009 (7:03 am)
-
|
|
Replying to: SilverBullet00 (Oct 27, 2009 6:49 am)
Thanks, Silver Bullet!
|
- #4058 of 4062
-
2006 Azzy
by plannermann
-
Nov 13, 2009 (8:31 pm)
-
|
Hi all, My 2006 Azzy is about to pass 59K miles. I can report that I have had the dash replaced twice, that plastic housing under the car scraped the ground, batt died. That is pretty much the extent of my Azzy injuries, all of which have been fixed free under waranty. My dealer is hawking an extended waranty for 4yrs at a cost of $3,000 - i think i will take a pass. i would love to have an extended waranty, but i dont see the Hyundai offers one here in vegas
Any thoughts on what i should have the dealer check on my last "under waranty" service.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
