Sign In Join 



Chevy Suburban

944 messages,  Last post on Nov 20, 2009 at 6:44 PM

You are in the Chevrolet Suburban & Tahoe Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Suburban, GMC Suburban, SUV


Messages Page 93 of 95
1
...
89
90
91
92
93
94
95
Prev
Next
Last
Go To Msg #
Search This Discussion

#915 of 944
Re: traction off / ABS lights are on [markanag] by kslrr
Mar 30, 2009 (3:08 am)
Reply

Replying to: markanag (Sep 26, 2005 6:59 pm)

Hello. New to the forum. I might have another reason for an indicated "sensor failure", especially if accompanied by noises from the front: Wheel bearing failure to point that the Center line of the wheel is no longer perpendicular to the Spindle, which would screw with the speed sensor gap. I will post what I find.
 
Fortunately for me, the bearings started to make the awful noise only 10 miles from home (Perris, CA) this morning just as I started my 245 mile trip to Las Vegas, where I work.
#916 of 944
Re: traction off / ABS lights are on [kslrr] by kslrr
Mar 30, 2009 (3:12 pm)
Reply

Replying to: kslrr (Mar 30, 2009 3:08 am)

Ok, I did find that the front bearings were failing. Especially the right which sounded like a coffee grinder and the play was at least 1/8 inch.
#917 of 944
HELP GMC 96 SUBURBAN 5.7 VORTEC by ozzman38
Jun 06, 2009 (2:50 pm)
Reply
thinking about buying a suburban 96 5.7 vortec, the owner said it over heated and they parked it and it been seating there for a year. some back yard mechanic told them the engine was froze the battery was dead the owner had a battery charger we charge it over night the next day the engine turn over so it not froze I pulled out the oil stick and it was rust covered is that from seating for so long or could it have a cracked block and coolant got in the oil??????
#918 of 944
Re: HELP GMC 96 SUBURBAN 5.7 VORTEC [ozzman38] by kiawah
Jun 06, 2009 (6:54 pm)
Reply

Replying to: ozzman38 (Jun 06, 2009 2:50 pm)

Could be a blown head gasket caused problem.
 
But if the oil stick is all rusty when you pull it out, you'll need a new engine. Sounds like the vehicle is a good candidate for the crusher.
 
Run, don't walk.
#919 of 944
Can't I just rebuild the enging] by ozzman38
Jun 07, 2009 (12:50 pm)
Reply

Replying to: kiawah (Jun 06, 2009 6:54 pm)

the body is in great shape if the only thing it needs is a rebiuld I can handle that why scrape it? A headgasket is nothing>
#920 of 944
Re: Can't I just rebuild the enging] [ozzman38] by kiawah
Jun 07, 2009 (4:36 pm)
Reply

Replying to: ozzman38 (Jun 07, 2009 12:50 pm)

If the engine has been sitting with water in the oil so that when you pull the dipstick it's rusty, then you could have rust on the main crank bearings, cylinder walls, etc.
 
R, DW
#921 of 944
96 suburban 2500 help! STEERING AND BRAKES by built2beatfab
Jun 10, 2009 (7:17 pm)
Reply
Have steering and brake issues recently put a steering pump and hydro boost bleed and troubleshooted everything flusterd need to pick someones brain that has some knowledge of this problem .it has abs thinking of doing the gear box next .I did the power steering pump a few weeks ago everything was fine 2 weeks later steering and brakes are out . let me know what u think thanks mike
#922 of 944
99 K1500 350 to a 454 by 99k1500burb
Jun 18, 2009 (9:50 pm)
Reply
I am putting a 1970s 454 into my burb. what is involved as far as brackets for pumps and alternator and stuff. has anyone done this. any pointers would be helpful.
#923 of 944
electrical problem by ahightower
Jun 22, 2009 (3:37 pm)
Reply
I have a 2005 Yukon XL. 6-CD unit, no NAV. Every now and then, maybe every 5th engine start, the clock will reset to 12:00 and it will cycle through the CD's, as if the battery had been dead and it was jump started. It doesn't forget the radio presets though, which confuses me. And I may be imaging this, but it seems to hesitate on start up, very briefly.
 
I'm thinking possibly bad battery connection? Do you suppose the NTB who sold me the battery just over a year ago would be able to check this (for free?)
 
Other ideas? Just the head unit, maybe? Alternator? I'm no electrician. So far it never fails to start, but resetting the clock is getting annoying, and my wife is getting a little nervous. Thanks for any ideas.
#924 of 944
Re: electrical problem [ahightower] by kiawah
Jun 22, 2009 (4:10 pm)
Reply

Replying to: ahightower (Jun 22, 2009 3:37 pm)

Most autoparts stores will do a free battery and alternator check, and look for a loose battery connection. Since NTB put the battery in, that's where I'd recommend you start.

Messages Page 93 of 95
1
...
89
90
91
92
93
94
95
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement