You are here: Forums SUVs Chevrolet Suburban & Tahoe Chevy Suburban

Chevy Suburban

944 messages,  Last post on Nov 20, 2009 at 6:44 PM

You are in the Chevrolet Suburban & Tahoe Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Suburban, GMC Suburban, SUV

Messages Page 92 of 95 1 ... 89 90 91 92 93 94 95 Prev Next Last

Go To Msg # Search This Discussion

#910 of 944 Re: Wanting to replace our Suburban [sbatncpl] by rockman59 Jan 28, 2009 (9:18 pm)
Replying to: sbatncpl (Jan 28, 2009 4:01 pm) Mine is a 1995 model with only 95,000 miles. Excellent shape, kept in the garage and everything works. ____________________________________________________________________ Don't even think about trading for one of the later models. Keep driving your '95 until you use it up....then upgrade. You won't be sorry.
#911 of 944 Re: Wanting to replace our Suburban [sbatncpl] by ahightower Jan 29, 2009 (4:36 pm)
Replying to: sbatncpl (Jan 28, 2009 4:01 pm) If you want new, I'd get an 09 with the six-speed transmission. If you want used, wait another year or two and pick up a used 09. That's one significant upgrade that I think is worth either paying for or waiting for. Replies to this message: murphy4 (Mar 10, 2009 2:07 pm)
#912 of 944 Re: Radio buttons -- paint coming off [tsf7] by northernliving Feb 16, 2009 (7:58 pm)
Replying to: tsf7 (Mar 31, 2008 12:20 pm) Mine looks the same (wife's fingernails!). You can get repalcement buttons from http://replacementradios.com/product_info.php?products_id=1032
#913 of 944 99 suburban 1500 transfer case leak by geodoc Feb 28, 2009 (9:53 am)
developed a transfer case leak 120k due to oil pump flange induced design defect (like msg# 49/377). i have a gravel drive and didn't detect leakage until i heard gear noise (alas, too late!) and internal components were fried. looking for a way to avoid same at 240k. is it possible to beef up this area of case with a weld or other? also looking for source for reliable taillight bulb receptacles, as i've had lots of trouble here
#914 of 944 Re: Wanting to replace our Suburban [ahightower] by murphy4 Mar 10, 2009 (2:07 pm)
Replying to: ahightower (Jan 29, 2009 4:36 pm) Has anyone leased a 2009 Suburban in the last few months? Are there any competaative lease rate in the market now?
#915 of 944 Re: traction off / ABS lights are on [markanag] by kslrr Mar 30, 2009 (3:08 am)
Replying to: markanag (Sep 26, 2005 6:59 pm) Hello. New to the forum. I might have another reason for an indicated "sensor failure", especially if accompanied by noises from the front: Wheel bearing failure to point that the Center line of the wheel is no longer perpendicular to the Spindle, which would screw with the speed sensor gap. I will post what I find.   Fortunately for me, the bearings started to make the awful noise only 10 miles from home (Perris, CA) this morning just as I started my 245 mile trip to Las Vegas, where I work. Replies to this message: kslrr (Mar 30, 2009 3:12 pm)
#916 of 944 Re: traction off / ABS lights are on [kslrr] by kslrr Mar 30, 2009 (3:12 pm)
Replying to: kslrr (Mar 30, 2009 3:08 am) Ok, I did find that the front bearings were failing. Especially the right which sounded like a coffee grinder and the play was at least 1/8 inch.
#917 of 944 HELP GMC 96 SUBURBAN 5.7 VORTEC by ozzman38 Jun 06, 2009 (2:50 pm)
thinking about buying a suburban 96 5.7 vortec, the owner said it over heated and they parked it and it been seating there for a year. some back yard mechanic told them the engine was froze the battery was dead the owner had a battery charger we charge it over night the next day the engine turn over so it not froze I pulled out the oil stick and it was rust covered is that from seating for so long or could it have a cracked block and coolant got in the oil?????? Replies to this message: kiawah (Jun 06, 2009 6:54 pm) ozzman38 (Jun 07, 2009 12:50 pm) kiawah (Jun 07, 2009 4:36 pm)
#918 of 944 Re: HELP GMC 96 SUBURBAN 5.7 VORTEC [ozzman38] by kiawah Jun 06, 2009 (6:54 pm)
Replying to: ozzman38 (Jun 06, 2009 2:50 pm) Could be a blown head gasket caused problem.   But if the oil stick is all rusty when you pull it out, you'll need a new engine. Sounds like the vehicle is a good candidate for the crusher.   Run, don't walk. Replies to this message: ozzman38 (Jun 07, 2009 12:50 pm) kiawah (Jun 07, 2009 4:36 pm)
#919 of 944 Can't I just rebuild the enging] by ozzman38 Jun 07, 2009 (12:50 pm)
Replying to: kiawah (Jun 06, 2009 6:54 pm) the body is in great shape if the only thing it needs is a rebiuld I can handle that why scrape it? A headgasket is nothing> Replies to this message: kiawah (Jun 07, 2009 4:36 pm)

Messages Page 92 of 95 1 ... 89 90 91 92 93 94 95 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Chevrolet Suburban & Tahoe Chevy Suburban