Last post on Nov 28, 2013 at 5:49 PM
You are in the Chevrolet Suburban & Tahoe
What is this discussion about?
Chevrolet Suburban, GMC Suburban, SUV
#83 of 1043 Is this worth doing myself??
Apr 14, 2005 (11:58 am)
Hi all ,
I am new to this forum. I have a 2000 chevy suburban LT . I love it. I have a question for those who work on their burbs themselves. Is it worth for me to take my burb in for the throttle body to be cleaned or is this something that is relatively easy to do ??
My gas pedal has been sticking awfully and I read on this forum and someplace else that this will solve the problem.
thanks in advance =)
#84 of 1043 Re: Need help with 1999 Fuel Filter [dick4]
Apr 16, 2005 (7:12 pm)
There are no special tools. The filter is located on the frame between the driver side front and rear door. There are not any tricks, just becareful when the line is disconnected, there will be some spillage. Other than that you are good to go.
#85 of 1043 Under carriage noise from 2003 Chevy Suburban
Apr 17, 2005 (4:44 pm)
Here's a new one for you!.
About two months ago I noticed a "rattelling/squeeking" sound comming from under the front carriage of my 2003 suburban> Sounded like the "chirping" you hear from the brakes when worn but woulddissapear after 1/10th of a mile or so. No specific reason or conditions it would appear under but it was loud and very noticable. Had brakes, new tires, and front end redone- no luck! still there- ideas?
#86 of 1043 Re: Electrial Flasher problem [gfergie]
Apr 18, 2005 (8:36 am)
gfergie - My 1999 Suburban has the same thing going on...I replaced the combination flasher switch (under the dash) hoping for an inexpensive fix. The problem is still there...were you able to solve the flasher problem..if so, how?
#87 of 1043 Re: Is this worth doing myself?? [burbmom]
Apr 18, 2005 (2:18 pm)
I have an '00 LS w/ 50k miles and about 2 months ago my throttle was sticking also. I went to a auto parts store and picked up an aerosol can of Throttle body/intake cleaner. I removed the air intake at the opening of the throttle body and sprayed the cleaner in while opening and closing the throttle. This fixed the sticking and haven't had any issues since.
#88 of 1043 Re: Suburban traction problems [4wdless]
Apr 18, 2005 (8:02 pm)
a 4x4 surburban with good truck michlins tires is the best 4x4 u could have. one question though, if u live where there is snow, why did u buy a 2 wd surburban? trade yours in on a 4x4! good luck!
#89 of 1043 Re: '90 Suburban parts: [muffterry]
Apr 18, 2005 (8:25 pm)
i have a 93 2500 3/4 ton burban and i had a/c problems as well in the rear vents. after calling several mechanics and chevy dealers i found out it was an orphus tube or screen filter or whatever u want to call it, was probably plugged. i had no idea how to get to it nor what it looked like nor how to fix it really. i called ghent cheverlet here in greeley co. and the nice man explained the details and printed me out sheets from the computer that shows all the parts and how to reconnect them. i guess my advice to u is contact a respected delership and talk to the parts dept. to see if they could help you in the same way or try chilton books. i wish you luck i know i needed it!
#90 of 1043 Re: Need help with 1999 Fuel Filter [dick4]
Apr 19, 2005 (5:01 am)
Usually they've been close to the transmission crossmember on the drivers side. The trick to relieve the pressure is locating the schrader valve on the fuel line near the top of the intake manifold. Then if your new fuel filter has threaded fittings on each end you won't need a fuel line removal tool. I'm not sure when Chev changed over but on my '03 Burb I needed a fuel line removal tool. Have fun!
#91 of 1043 Re: fuel filter [cbett1]
Apr 19, 2005 (5:32 am)
Well last night was the night! Not able to justify a $40 removal tool I made a quick trip to AZ and I'm bringing home a $10 fuel line disconnect tool. I relieved the pressure at the shrader valve and got the filter off no problem. The trouble was getting the hose off the filter. The connector was soo close to the can that the removal tool wouldn't get in there to release the quick clip. So I hack sawed it off between the hose and filter and was then able to get in there with my modified disconnect tool and some needle nose so I could remove the nipple from inside the hose. Only took me an hour but hey - it was time well spent!
#92 of 1043 Door rattle 97 Sur.
Apr 19, 2005 (12:51 pm)
I have several rattles in my doors on my 97, do I need to replace the seals to rid the problem?