Sign In Join 



Project Cars--You Get to Vote on "Hold 'em or Fold 'em"

19337 messages,  Last post on Nov 24, 2009 at 6:11 PM

You are in the Classic Cars Forum. Your Host is mr_shiftright

What is this discussion about? Classic Cars


Messages Page 1645 of 1935
1
...
1642
1643
1644
1645
1646
1647
1648
...
1935
Prev
Next
Last
Go To Msg #
Search This Discussion

#16433 of 19337
Re: [Mr_Shiftright] by xwesx
Jan 13, 2009 (4:51 pm)
Reply

Replying to: Mr_Shiftright (Jan 13, 2009 3:03 pm)

Very true, Shifty. My grandparents are absolutely this way. They would rather climb into their car then have to bend down.
#16434 of 19337
One thing about Mazda Rotaries by jlflemmons
Jan 13, 2009 (4:57 pm)
Reply
Make sure it starts easily when cold. If you bypass the rev limiter and wind those things up, which they will freely do, you get wear on the rotor wipers and lose compression when cold. Crank that sucker all you want and it won't want to start, or if it does it will burn oil and run poorly until fully warmed up.
 
Knew a guy who routinely ran his up around 9-10K rpm all the time. After an extended highway run at those speeds, he pulled up to his house and turned it off. Next morning, no start, no compression. Mazda warranteed the engine, but told him the new engine was all his if it broke.
#16435 of 19337
Re: One thing about Mazda Rotaries [jlflemmons] by oregonboy
Jan 13, 2009 (5:09 pm)
Reply

Replying to: jlflemmons (Jan 13, 2009 4:57 pm)

Was this an RX-7 (series 3?) or RX-8?
#16436 of 19337
Re: [michaell] by fintail
Jan 13, 2009 (6:10 pm)
Reply

Replying to: michaell (Jan 13, 2009 2:56 pm)

I think carriage tops and the like are very much an east coast thing. I almost never see them out here either - not on cars made after around 1985 anyway.
 
I have to doubt in 40 years, when I am around 70, should I or any of us be around then, that the computer componentry in modern cars will have held up. Maybe it will all be able to be bypassed by some miracle new technology.
#16437 of 19337
Re: [fintail] by Mr_Shiftright HOST
Jan 13, 2009 (6:43 pm)
Reply

Replying to: fintail (Jan 13, 2009 6:10 pm)

Well they are running the Space Shuttle with *very* old tech and it works fine...well, except for a couple of explosions.
 
Their computers still use "core memory" (ferrite rings)!!!
#16438 of 19337
Re: . [qbrozen] by guss
Jan 14, 2009 (4:34 am)
Reply

Replying to: qbrozen (Jan 13, 2009 11:47 am)

1998 to 1991 Mazda RX-7 Convertibles only came non-turbo. The hoods never had the scoop. Unless the rebuild included adding a turbo ,my guess would be that the hood was replaced due to an accident.
 
I liked your thoughts about what teenagers will be driving in fifty years. I can see Lincoln Town cars with body kits , lowered and painted lime green. Of course they will have added hydraulic seats to make getting in and out easier.
#16439 of 19337
Re: . [guss] by qbrozen
Jan 14, 2009 (7:32 am)
Reply

Replying to: guss (Jan 14, 2009 4:34 am)

aha. thanks for the tips. so i was right to question it. maybe i'll email the seller.
#16440 of 19337
Re: . [qbrozen] by qbrozen
Jan 14, 2009 (8:57 am)
Reply

Replying to: qbrozen (Jan 14, 2009 7:32 am)

seller says engine is still non-turbo. Hood was replaced for aesthetic reasons.
#16441 of 19337
how much to fix this? by Mr_Shiftright HOST
Jan 14, 2009 (9:10 am)
Reply
Dent on '96 Miata. How much you think to bang it out and blend in the paint? This is not a quiz, I really don't know. Any ideas?
 

 
#16442 of 19337
Re: how much to fix this? [Mr_Shiftright] by qbrozen
Jan 14, 2009 (9:30 am)
Reply

Replying to: Mr_Shiftright (Jan 14, 2009 9:10 am)

I'm not sure you are "banging that out." But I'm going to say $600-$700. That should cover it either way. Half for labor and/or new fender and half for the paint. But I'm not a pro and I've been WAY off before. Hell, the insurance company cut me a check for $1200 for the bumper on our Pacifica. That was to replace it, the brackets behind it, and paint.
 
Man, those hood bras are such a bad idea. I can't believe folks still use them.

Messages Page 1645 of 1935
1
...
1642
1643
1644
1645
1646
1647
1648
...
1935
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement