Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Wagons Subaru Crew Subaru B9 Tribeca Subaru B9 Tribeca (B9X)
8367 messages, Last post on Dec 04, 2009 at 12:57 PM
You are in the Subaru B9 Tribeca Forum. Your Host is kcram
|
|
|---|---|
|
Replying to: c_hunter (Jan 24, 2006 9:40 am) also ow else would you install tires if its not jacked up. I use a floor jack and losen the lug nuts first then jack the car up. remove tire, spray the part where the wheel and car meet with WD-40 along with a light spray on the lug nut itself on the threads and the base area. then hand tighten in a cross pattern. as I lightly jog the wheel to make sure its sitting in the center of the tapered lug nuts. when I cant tighten anymore with holding the wheel from spinning. I lower until wheel touches ground lightly and continue tightening. then drop down rest of way and finish tightening. then after 2 mile drive retighten. thats it  the wheels I installed had no performance (ride/handling) issues at all with the 20 inch wheels. I cant say that its not affecting the bearings being offset by .5 inches more but I do know the handling is much much much improved over the OEM tires. 
|
|
|
Replying to: mayberryguy (Jan 23, 2006 5:52 pm) Also, everytime I come out to the Tribeca at night, be it in our driveway or in a prking lot, and unlock it using the remote, I break out into a huge grin when those puddle lights come on. I love this car (SUV, truck, crossover....???)!!! |
|
|
Replying to: mayberryguy (Jan 23, 2006 5:52 pm) -juice |
|
|
Replying to: cluelesspa (Jan 24, 2006 10:14 am) http://www.tirerack.com/wheels/tech/techpage.jsp?techid=91 It might be good to get a professional opinion on lubricating the threads on your lugs -- I know many mechanics advise strongly against it. For one thing, it can trick your torque wrench and you may not get a proper setting. If tightening by hand, it just makes it that much easier to over-torque (by a lot). If there's one place on the car where I'd want natural friction, it would be on those lugs. I do think it's OK to hit the hubs with WD-40 though. |
|
|
|
|
Replying to: jandj94 (Jan 23, 2006 11:08 pm) |
|
|
Replying to: subienewbie2 (Jan 24, 2006 5:11 pm) |
|
|
Replying to: jandj94 (Jan 24, 2006 8:45 pm) 
|
|
|
Replying to: pschreck (Jan 25, 2006 3:41 am) -Brian
|
|
|
|
| cool so you can get both subs installed | |
|
|
|
Replying to: jandj94 (Jan 24, 2006 8:45 pm) |
|
You are here:
Forums
Wagons Subaru Crew Subaru B9 Tribeca Subaru B9 Tribeca (B9X)
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2007 Subaru B9 Tribeca
Browse by Board
Browse by Topic
Today's Chats
