Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans Mercedes-Benz E-Class Mercedes-Benz E-Class Diesels
570 messages, Last post on Sep 06, 2009 at 6:25 PM
You are in the Mercedes-Benz E-Class Forum. Your Hosts are pat & karens
|
Replying to: bduser (Jun 20, 2006 10:17 am) I think you got a case for a legal action against both your dealer and MB. 1) Lack of Contradictory written information regarding B100 2) Absence of proper documentation when taking possession of the car 3) You clearly indicated your dealer you intended to use Biodiesel and he did not objected in any way. |
|
|
Replying to: vchiu (Feb 05, 2007 3:03 am) RPF stands for te German word RussPartikelFilter. that is the German Acronym of DPF. DPF should be mandatory for all diesels including trucks. they drastically reduce soot
|
|
|
I would be curious to see a real world MPG comparison between both. It seems the car develop nearly the same HP and are of similar size and weight. How about performance wise as well? Well, I know that the MB is maybe twice the price of the Toyota, So this can't be taken into consideration. Waiting for an Edmunds Comparison test with anticipation |
|
|
Replying to: vchiu (Feb 05, 2007 3:46 am) J |
|
|
Replying to: nimhrod (Oct 10, 2006 3:27 pm)  I do think it is a flaw, perhaps. Have wondered if one of the drain holes is either blocked somewhere, or if maybe the deck lid gasket isn't positioned properly. HOwever, as I don't drive the car all that much, and it is always garaged, I haven't remembered to follow up on that little idiosyncrasy. Let me know what you find out. And perhaps I'll follow up at the dealer myself. J
|
|
|
Replying to: blissful (Feb 10, 2007 1:10 pm) Anyone else with this same problem? Well, here's what happened at the dealer. They called and said that the problem was fixed. When I went to pick her up, they explained that "someone" had put too long a screw into the bottom license plates holes and had pierced the trunk lid, thus allowing water to enter the trunk. This seems a little far-fetched to me. 1. Who would FORCE very long sheet metal screws into a new MB license plates bracket. How can you NOT notice when you are busting through the steel lid. 2. I am the 2nd owner and the bottom two screw holes were empty when I purchased the car. How can a large quantity of water enter two vertical screw holes? At that size hole, water would appear to be too dense? to force it's way into the holes instead of continuing to run down the lid. Besides, these alleged holes are BEHIND the plate and bracket and UNDER the overhanging license plate light. Anyway, they said it wasn't a warranty item and charged me $140 to plug the hole with silicone. A month later the trunk lid is full of water again and the floor of the trunk is soaked. I bring it back and the service writer says this time it's a missing grommet. When I pick it up he says it wasn't a missing grommet. The repairman SOMEHOW missed the fact that there were TWO license plate screws and he had only plugged one the previous time! I still don't buy the story about two long screws being drilled through the lid. Why would someone replace the existing factory screws with something else? This does not sound plausible or likely to me at all.
|
|
|
I'm looking for a used 2005 or 2006 CDI. Most of the prices I've seen are close to what the price guides here at Edmunds would suggest for a Mercedes certified used E320 CDI. There's a dealer however in South Carolina that is selling a 2006 left over for $8000.00 off msrp. It's a new vehicle not used. It doesn't have much as far as option are concerned so I'm not nuts about it. It does make me wonder about how much room dealers have to lower their prices on used cars. Has anyone gotten any substantial discounts on certified used vehicles from a dealer or are the diesels too popular to be able to get much of a discount? Thanks dave
|
|
|
|
|
Replying to: dave8345 (Feb 27, 2007 6:10 am) To answer yout question I paid what I did because it was EXACTLY what I wanted.I followed many web sites;Ebay.Trader,etc. I am also a member of the Mercedes Benz club. A fellow member who is also a high end car broker had taken it in trade from a customer who wanted the new S car. Needless to say the car I bought was a special order as these cars are never ordered equiped as this one. I would say that the price you are quoted is pretty good depending on equipment. We all know that dealers quote higher than they will usually agree to sell. I assume that you have checked all possible rebates etc. Personally I would go for a very good low milage preowned CDI. Maybe you could then get the equipment that you prefer. Have bought 3 preowned MB's in the last 2 years. One had 1,800 mi,the second 3,500 mi and the third 2,700 mi. Dicounts off list were 15-25%. Hope this helps. You have to look,look,look and be patient.The internet is your best friend although the one I just bought --a 2007 SLK350 popped up in our local newspaper. You never know where or when a deal will show up.
|
|
|
Thanks Greasy. After comparing a used 2005 or 2006 CDI to a new camry hybrid, I still prefer the CDI but the camry hybrid new with everthing is around 30k versus 45k for a used CDI with the options I'd want. I own a 300SDL which has been a great car so I was seriously considering the CDI's but I'll probably go with the Toyota. Dave |
|
|
Replying to: nimhrod (Feb 10, 2007 1:38 pm) I will check to see about my license plate screws, but I agree, their story is fishy. I haven't yet taken mine to the dealer here on that same question. I won't get to it until late March now, but if I figure anything out, I'll let you know! (Unless you now have an answer that satisfies you?) J
|
|
You are here:
Forums
Sedans Mercedes-Benz E-Class Mercedes-Benz E-Class Diesels
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Mercedes-Benz E-Class
Browse by Board
Browse by Topic
Today's Chats
