You are here:
Forums
Sedans
Chevrolet Impala
Chevrolet Impala 2006

3460 messages, Last post on Sep 05, 2009 at 6:21 AM
You are in the Chevrolet Impala Forum. Your Hosts are pat & karens
|
Is anyone aware of any way that bluetooth can be added? I believe it is an option on the 2009 so does that mean it can be added as a dealer add-on if it doesn't come with it? Can it be added in previous years? Thanks
|
|
|
Replying to: joeblack1 (Apr 20, 2009 12:19 pm)
|
|
|
Replying to: luckystar17 (Apr 19, 2009 11:46 am) The symbol towards the top on the side says "cold line" or "cold fill" or something like that and has an arrow that points down. That mark is simply directing you to look toward the bottom of the bottle to find the line that is molded into it. The very first time I checked the coolant in the car it was hard to see the line. I opened the coolant reservoir cap and put a flashlight on the opening. Once I did that and illuminated the reservoir, the cold fill line became obvious. Remember to use the orange Dex-cool to fill it. Prestone makes a pre-diluted Dex-cool that is very convenient. I keep a bottle of it on hand at all times. I have the 3.5L V6 in my '06 Impala and the coolant needs to be brought up to the cold fill line every once in a while. My original water pump also failed and was replaced at about 33,000 miles. |
|
|
Replying to: ryster (Apr 22, 2009 7:00 pm)
|
|
|
Replying to: joeblack1 (Apr 27, 2009 5:28 pm) The system definitely uses OnStar, and only works on vehicles with specific steering wheel controls (LS and 1LT only have cruise on the steering wheel.) So, while the Bluetooth capability is present in the '09 OnStar module, it doesn't work if the vehicle doesn't have the necessary factory installed steering wheel controls to go with it. I have a Motorola T305 Bluetooth unit that I use in my '06 Impala. It is clipped to my sun visor and works great. Plus it was only $40 and can be used in any vehicle |
|
|
Posted this in the 2010 section inadvertantly, so I'll repost here. Hope someone has knowledge of this problem as I am dead in my tracks, so to speak. Started the 06 3LT, 3.9 V6, when I pushed the brake and attempted to move the shifter into gear, it would not move and the release button is frozen in place. Everything functions as usual, just will not come out of Park.
|
|
|
Replying to: hemac (May 27, 2009 9:14 pm) Hope this helps. Otherwise, I have no clue.
|
|
|
|
|
Replying to: awry (May 27, 2009 10:26 pm) Remember to apply parking brake, then allow car to move in neutral so the brakes are holding the car before putting it in park.
|
|
|
Replying to: imidazol97 (May 28, 2009 4:23 am)
|
|
|
Replying to: hemac (May 28, 2009 8:04 am)
|
|
You are here:
Forums
Sedans
Chevrolet Impala
Chevrolet Impala 2006
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Impala



Browse by Board
Browse by Topic
Today's Chats