You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300: Problems & Solutions 

Chrysler 300: Problems & Solutions - READ ONLY

1124 messages,  Last post on Oct 12, 2006 at 2:38 PM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300, Sedan

Messages Page 110 of 113 1 ... 107 108 109 110 111 112 113 Prev Next Last

Go To Msg # Search This Discussion

#1086 of 1124 Regarding the shake at idle and in Reverse by clintrogers Aug 05, 2006 (12:21 pm)
I have an 05 Touring and I experienced this issue both at idle and every morning upon starting the car. The problem was a buildup of carbon on top of the piston heads. This resulted in a lack of compression in the combustion chamber resulting in, of coarse, rough idle when at a stop. The dealership decided to do a combustion chamber cleaning, fuel injection cleaning and rotated my valve springs. Now the car is very smooth again- no rough idle even with the A/C on. Sometimes I feel a very slight engagment of the air conditioner turning on but not an more then any other car i've driven. I'm wondering if anyone else has sort of a rough shift out of park, especially in cold weather- sometimes it jerks forward, any advice would be appreciated. Even with the few problems I've had i like the car.   "Anyone that builds good cars, Can build bad!" Replies to this message: 1952 (Aug 07, 2006 8:30 am)
#1087 of 1124 Re: Regarding the shake at idle and in Reverse [clintrogers] by 1952 Aug 07, 2006 (8:30 am)
Replying to: clintrogers (Aug 05, 2006 12:21 pm) How true, anyone who builds good and bad cars, should stand behind there product, with any new purchase when the product is good I will talk of it praises, when it's a bad product and cant be repaired properly, there should be a refund or replacement with NO hassles, cars or otherwise...
#1095 of 1124 Problems with 300C by mrwright06 Aug 15, 2006 (5:20 am)
Okay, I bought my 300C July 16, 2006 CPO with 16,000 Miles on it. I have 18,300 now and the car is scheduled to go into the shop again this Friday, I was just wondering if anyone were having these issues as well:    * Auto-Up feature on Driver's side works when it wants to (working right now), Dealer couldn't duplicate the problem    * Alignment jerks to the left & right  * Slight vibration through steering wheel (even on smooth roads, especially at highway speeds)    * Tranny jerks a bit when coming out of park to reverse or reverse to drive  * Sometimes tranny jerks (slightly) while driving  * If I were to accelerate then let go of the gas pedal I have a "severe" downshift and loose my transmission for like 30 seconds. When I hit the gas the car does nothing but "rev" up and slow down.     * Radio won't come in first 30 seconds, started doing this just the other day, but now it comes on right away.    * Molding striping on roof coming loose (getting these replaced, they have them in now)   I like the looks and features of this car, but at this point I’m sort of frustrated with some of these issues and I may not buy another Chrysler product. (This is my first Chrysler product, my co-workers warned me about Chrysler, I should’ve listened!) Replies to this message: vic10 (Aug 15, 2006 9:10 am) mrwright06 (Aug 17, 2006 11:35 am) blcxusa (Aug 15, 2006 5:14 pm) mrwright06 (Aug 20, 2006 6:57 pm)

Messages Page 110 of 113 1 ... 107 108 109 110 111 112 113 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chrysler 300/300C/300C SRT-8 Chrysler 300: Problems & Solutions