Chevy C/K Series Maintenance and Repair - READ ONLY

449 messages, Last post on Apr 14, 2008 at 11:01 AM

You are in the Pickups - Archived Discussions Forum. Your Host is kcram

This discussion is ARCHIVED. To reactivate the discussion, post a request in the Lost? Ask the Pickups Host for directions! discussion.

What is this discussion about? Chevrolet R/V 2500 Series, Chevrolet C/K 10 Series, Chevrolet R/V 3500 Series, Chevrolet C/K 20 Series, Chevrolet C/K 30 Series, Chevrolet C/K 2500 Series, Chevrolet C/K 1500 Series, Chevrolet C/K 3500 Series, Truck

Outline

Messages Page 45 of 45: 1; ...; 39; 40; 41; 42; 43; 44; 45; Prev; Next; Last

#441 of 449 05 Chevy D/A Horn Failure by califasramsfan Jan 28, 2008 (6:15 pm)
The horn quit working on my 05 Chevy D/A. I have checked the fuse located in the fuse box under the hood, next to the driver side battery. The 15 amp fuse was good as well as the horn relay mounted next to the fuse. Has anyone else had a similar problem? What is the fix and how much will it cost to repair? thanks, Califasramsfan.
#442 of 449 Chuggin on 1993 5 spd manual silverado by tex64 Feb 03, 2008 (7:55 am)
hey im have a problem i just did a tune up on my truck figuring it would stop the chuggin and it did for a lil while but now everytime i push the gas pedal down about lil more then 1/2 way its starts shaking and goin crazy and i cant figure out what it is. can anyone give me an idea of why its doin this?
#443 of 449 95 chevy c/k pickup alarm system. by allyhandra07 Feb 14, 2008 (1:33 pm)
HELP!! My step dad has given me his 1995 chevy. but of course it came with a problem. The alarm system engages itself and the hazard lights on the truck flast constantly. when the alarm is engaged I cant turn the truck on or anything. I dont have the clicker thing to turn the alarm off and the constant hazard ligths are causing the battery to die. I have removed the fuse for all the lights in the truck but sure enough they keep on flashing. I was wondering if anyone has any idea on how to disarm the alarm or a wiring diagram for the truck.. any help is much appreciated... Thanks..
#444 of 449 1998 Chevy C1500 by wjr50 Feb 28, 2008 (6:04 pm)
I have a 1998 Chevy C1500 W/T automatic. It starts fine when I first start it & it runs smoothly. When I put it in gear & move several feet, the first couple of times it shuts completely down...no lights, nothing..everything dead. I wait about a minute or 2 it will start right back up again, lights & all. After several times of completely shutting down & get it going again...I am then able to move it around in our drive way with no problem (forwards & reverse). I haven't notice it completely shutting down in reverse though come to think of it. Any suggestions? & I haven't driven it down the road since this started..kind of affraid to.
#445 of 449 2000 k2500 wont start by chevyman6667 Mar 21, 2008 (9:00 am)
I have a 2000 k 2500 with 5.7 that will not start sounds like the timing is advanced win I try to start. would like to know if there if some electronic control that would go bad that would do this or if they are known to jump time. It has 146000 mile on truck
#447 of 449 code problems by wg61260 Mar 23, 2008 (2:24 pm)
i have a '92 silverado, 4.3 .I am getting a code of 22,33, 45...all these things are brand new . truck starts but will not accelerate with tps unplugged and map clamped off...with tps and map connected will not stay running
#448 of 449 Re: 1986 Chev 1/2 Gas Gauge Problem [dschamber] by herlihy Apr 11, 2008 (10:04 am)
Replying to: dschamber (Oct 29, 2006 12:57 pm) Hi, I am now wondering if you located the fuel guage problem I too have the same one. Thanks Jim_h_m_myahoo.com
#449 of 449 chevy duel tank gas guage issue by herlihy Apr 14, 2008 (11:01 am)
I am trying to help out a pal with a 1988 chevy truck with duel tanks and trying to identify why the thanks switch but the guage stay at 1/4 tank in either position, before I looked at it the dash switch and transfer valve were changed, I can make the guage go to full in either position by grounding the sensor line at the tank the problem is grounding either will work no matter what position the switch is in. its the early fuel injection system so I done want to change the float assemblys unless Im sure and I have removed and tested the guage Thanks Jim