- #349 of 449
-
Re: 1997 C/K CAMSHAFT POSITION SENSOR PROBLEM [seewoody]
by dchase1
-
Dec 24, 2006 (9:49 am)
-
|
|
Replying to: seewoody (Nov 14, 2006 9:12 pm)
thanks for the advice.the problem was i had installed boshch spark plugs.thought they would be better plugs.but i guess they dont work in chevys.in the process of figuring out this nightmare,I cracked the distributor because of those easy to reach well designed distibutor cap mounting screws.so now instead of just replacing the spark plugs i need a distributor after removing the cap about 50 times to figure out what was going on.also have a broken door buzzer circut,because of those heavy duty switches chevy put where the door closes.so u r right it is the distributor but the first problem was as simple as the wrong plug.bosch just screws up the whole vehicle.never guessed it cause they were new.runs good now.light goes out if the cap doesnt move.living with it for now,till i have an extra 500 for the distributor.exspensive plastic.I love vehicles. 
|
- #350 of 449
-
Someone stoll my carborator spings!!!!!!
by redcurlz
-
Dec 28, 2006 (7:57 pm)
-
|
|
I have a 89' Chevy c/1500, with a 4brl. carbed V8. Someone all the springs off! Where can I find a good diagram of the carborator to put new ones on? Thanks.
|
- #351 of 449
-
Re: 2002 2500HD Duramax [marshgator]
by iplaybass
-
Dec 29, 2006 (12:37 pm)
-
|
|
Replying to: marshgator (Jul 09, 2006 3:27 pm)
yes this is the limp home mode. the 2 trucks I've had do this needed fuel pumps.....  one needed a pressure reg. as well
|
- #352 of 449
-
Re: turns over but wont start [xwesx]
by iplaybass
-
Dec 29, 2006 (12:44 pm)
-
|
|
Replying to: xwesx (Jul 24, 2006 10:19 am)
most auto parts stores around here you can get a pressure tester to see if your fuel pump is putting out the right amount of fuel. before you take everything apart.
|
- #353 of 449
-
Re: rear brakes locking up [69flh]
by iplaybass
-
Dec 29, 2006 (12:49 pm)
-
|
|
Replying to: 69flh (Apr 26, 2004 10:17 am)
had this problem a few years back on a 92. it was the brake line.. the brake line has an inner and outer wall if the inner wall is broke you cant see it but when you hit the brake it keeps the line closed 'so it lockes it up'
|
- #354 of 449
-
Re: In need of help on my 1990 [mcmike06]
by iplaybass
-
Dec 29, 2006 (12:58 pm)
-
|
|
Replying to: mcmike06 (May 05, 2004 5:19 pm)
pull the brake light switch off of the mount that its on get some one to look at your lights as you slide the switch from on side to the other. if the lights go off then you need to remount the switch and ajust it to work with the brake peddel.. if it doesnt work then replace the switch and try again..
|
- #355 of 449
-
Re: Tonneau cover? [91chevyman]
by iplaybass
-
Dec 29, 2006 (1:01 pm)
-
|
|
Replying to: 91chevyman (Nov 22, 2006 11:39 pm)
if you go into an autozone they have them cheap... 350.00 here
|
- #356 of 449
-
Re: need new front cilp [fbksroofer]
by iplaybass
-
Dec 29, 2006 (1:12 pm)
-
|
|
Replying to: fbksroofer (Dec 22, 2006 7:16 am)
are you trying to change your 4 head light system to a 2 ? if you are we need to know if your 4 are Sealed head lights or are they composites? if they are not composite then you will have to replace your radiator support to go from a 4 to a 2 light system. along with grill and as far a the wiring I will look on my truck and tell you the color code to wire it up.
|
- #357 of 449
-
Re: Clicking noise in reverse [69flh]
by iplaybass
-
Dec 29, 2006 (1:16 pm)
-
|
|
Replying to: 69flh (Jun 04, 2004 8:30 am)
check your u joint
|
- #358 of 449
-
Re: Someone stoll my carborator spings!!!!!! [redcurlz]
by iplaybass
-
Dec 29, 2006 (1:24 pm)
-
|
|
Replying to: redcurlz (Dec 28, 2006 7:57 pm)
buy a rebuilt kit or go look at one they have and blow up view of the carb..
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups 
