You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma 2005+

7580 messages, Last post on Nov 10, 2009 at 9:42 PM
You are in the Toyota Tacoma Forum. Your Host is kcram
|
Replying to: xatlx (Jun 07, 2008 7:39 pm) |
|
| Does anyone have experience installing a keyless entry pad on the new generation Tacoma? Current vehicle is an '07 DC TRD 4X4...any info and insight would be greatly appreciated...Thanks for the help! | |
| My town is getting hit hard by converter thieves. Toyota trucks, with their high clearance, bolt-on converters and precious metals in the unit, are prime targets. There is a company that sells wire cages made out of aircraft cables. They can't be cut with a sawzall and they are connected to the truck so even if the pipes are cut they can't pull the unit loose. About $238.00 as I recall. On trips, or if you park in a lot during the day, someone could cut off an un-protected unit in seconds. I wouldn't advise trying to cover it with a skid plate or similar protecter because of the heat build up. Thoughts? | |
|
catclamp.com sells a converter guard made out of aircraft wire for $269.95. Most people have insurance deductibles higher than that, so any theft loss is going to cost you out of pocket expense to get it replaced. Besides, you can transfer it to the next vehicle when you decide to sell. Anyone who ever parks their truck in an un-guarded area, should look into this product. |
|
|
I have a 2005 tacoma sport double cab. My airbag light recently came on and when I brought it to the dealership I was told that the left front sensor had corroded along with the wire harness. I was then told that this was a repair upwards of $3000!! Does anyone know if this is a recall, I can't see how this can be considered normal wear and tear on a 3 year old truck. Thanks Jay
|
|
|
Replying to: jaybird12 (Dec 03, 2008 7:06 pm) Thanks, Wayne
|
|
|
Replying to: sae (May 01, 2008 9:27 am) Thanks, Wayne
|
|
|
Replying to: wsuiter (Dec 03, 2008 8:23 pm) |
|
|
Replying to: wsuiter (Dec 03, 2008 8:32 pm) |
|
|
|
|
I have a Ford Bronco II Eddie Bauer Edition that a friend gave me. I need to have it smogged but cannot get it passed due to a missing hose. I do not see where the hose should connect to stop the escape. Does anyone have a similar truck that you can help me find the solution to my problem. I would rather do it myself and save some money on it. Just to have the diagonistic it will cost another $100. Maybe some one out there can give me some info. Thanks, |
|
You are here:
Forums
Pickups
Toyota Tacoma
Toyota Tacoma 2005+
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2011 Toyota Tacoma



Browse by Board
Browse by Topic
Today's Chats