Sign In Join 



Toyota Tacoma 2005+

7580 messages,  Last post on Nov 10, 2009 at 9:42 PM

You are in the Toyota Tacoma Forum. Your Host is kcram

What is this discussion about? Toyota Tacoma, Truck


Messages Page 459 of 759
1
...
456
457
458
459
460
461
462
...
759
Prev
Next
Last
Go To Msg #
Search This Discussion

#4577 of 7580
Re: Tail Gate Lock [cabforles] by lakevillelarry
Apr 08, 2005 (9:41 am)
Reply

Replying to: cabforles (Jul 09, 2005 9:58 am)

Did you ever find a solution? I Googled Tail Gate locks and found the PopLock.
#4578 of 7580
Re: speedometer [chacotaco] by tnt67
Jul 28, 2005 (4:47 am)
Reply

Replying to: chacotaco (Jul 27, 2005 12:59 pm)

I may know where there is a set of 17" take offs. Check my profile for an address.Thx.
                              tnt67
#4579 of 7580
Re: Random Part? [boone88rr] by thistle
Jul 28, 2005 (5:25 am)
Reply

Replying to: boone88rr (Jul 27, 2005 10:57 am)

Yes, bonne88rr,
RE: It's a cheap device to serve as a damper. When connected correctly between the dash and glove box
 
I thought the same thing (a wire cable would work too) ...but since mine isn't attached and the glove box still works fine, it began to make me wonder why even make the effort? (maybe it'll be different in 06?)
 
RE: cabin air filter nobody seems to know about.
 
Hey, that's the reason why I was back there in the first place... (It's such a simple improvement) -Do you happen to have the measurement handy if you've put one in?
#4580 of 7580
Re: Random Part? [thistle] by tjyoder
Jul 28, 2005 (5:36 am)
Reply

Replying to: thistle (Jul 28, 2005 5:25 am)

Try searching this forum for "cabin air filter" there is instructions on how to make your own.
#4581 of 7580
Re: Random Part? [thistle] by boone88rr
Jul 28, 2005 (5:53 am)
Reply

Replying to: thistle (Jul 28, 2005 5:25 am)

Yeah I posted it here: Click Here
 
or you can always buy one fitted for the 4Runner, Denso p/n 453-1013
#4582 of 7580
Re: Winshield water spots [wooddorker] by toytruck
Jul 28, 2005 (7:06 am)
Reply

Replying to: wooddorker (Jul 28, 2005 2:58 am)

>Last time I checked, most residential glazing didn't have the same soft plastic coating as automotive safety glass.<>
 
That's why you better stick to woodworking!! LOL
#4583 of 7580
Re: Wade hood protector questions... [jtruck] by ruskastud
Jul 28, 2005 (10:54 am)
Reply

Replying to: jtruck (Jul 27, 2005 5:43 pm)

I went ahead and put mine on anyway, and I think that it is fine now. After a few days, the factory rubber on the top of the grill/lights formed to the protector, and it looks fine. It was only making my hood sit up a few mm anyway. Barely noticeable unless you looked very closely at where the hood meets the quarter panels above the lights. The hood closes fine, and the protector really helps with the bugs.
 
If anyone else has any other suggestions, let me know. I initially posted to make sure I wasn't doing something wrong.......
#4584 of 7580
Re: speedometer [tnt67] by chacotaco
Jul 28, 2005 (11:03 am)
Reply

Replying to: tnt67 (Jul 28, 2005 4:47 am)

I tried e-mailing you with my e-mail address, are these rims in Texas? How much?
#4585 of 7580
2005 Tacoma Steering Problems by jroks
Jul 28, 2005 (11:13 am)
Reply
Hello All,
 
I picked up my '05 Tacoma on Monday (V6 Access Cab TRD 6-spd Manual) and experienced a steering problem. It had only 8 miles when I drove it off the lot. I drive about 40 miles and take a right turn and felt like the power steering failed. I had to muscle the steering wheel to make a right turn or else I would have taken a wide turn into the other lane. After the turn, everything was fine. I thought it was just my driving, but my wife experienced the same problem the next day. I took it in to the dealer to have a look at my truck and they found no problem. It has about 200+ miles on it now and have not experienced the problem since. Anyone experienced this problem?
 
-jroks
#4586 of 7580
Re: Fill Empty Fog Light Holes [boone88rr] by boone88rr
Jul 28, 2005 (12:02 pm)
Reply

Replying to: boone88rr (Jul 22, 2005 8:52 am)

I have recently looked into buying the PIAA 510 to fill the holes in my bumper. I have to do some measurements and see if there is a way to mount them in there either using the blanks or some other way.


$400 bucks is a little steep for factory fogs and the ones on ebay look pretty cheap. If the specs work, this may be my happy medium.

Messages Page 459 of 759
1
...
456
457
458
459
460
461
462
...
759
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement