You are here: Forums Sedans Chevrolet Malibu Chevrolet Malibu: Problems & Solutions 

Chevrolet Malibu: Problems & Solutions - READ ONLY

3823 messages,  Last post on Oct 12, 2006 at 2:31 PM

You are in the Chevrolet Malibu Forum. Your Hosts are pat & karens

What is this discussion about? Chevrolet Malibu, Chevrolet Malibu Maxx, Electrical, Engine, Sedan

Messages Page 378 of 383 1 ... 375 376 377 378 379 380 381 ... 383 Prev Next Last

Go To Msg # Search This Discussion

#3769 of 3823 Smell of Burn Oil after Oil Change by sean74 Oct 02, 2006 (7:19 pm)
I had my engine oil changed at jiffylube yesterday. After I drove home I smelt burn oil, and I also found a small amount of smoke after I opened hood. So what happened? Does anybody have such kind of experience. Thanks a lot. Replies to this message: maxx4me (Oct 03, 2006 12:58 am) mr_bots (Oct 03, 2006 7:02 am)
#3770 of 3823 Re: Smell of Burn Oil after Oil Change [sean74] by maxx4me Oct 03, 2006 (12:58 am)
Replying to: sean74 (Oct 02, 2006 7:19 pm) Yep, just happened to me yesterday after I changed my own. As the filter is removed, the oil gushes out, splashing on to the exhaust pipe. There should be no problem, and the odor will go away in a day or two.
#3771 of 3823 Re: HVAC problems. [3745] by e2helper Oct 03, 2006 (5:14 am)
Replying to: 3745 (Oct 02, 2006 3:20 pm) Actually stepper motors I have seen use 4 wires. Pulse count motors are different and only use 2 wires - although I really can't explain the differences in how they are controlled Replies to this message: 3745 (Oct 03, 2006 7:31 am) e2helper (Oct 03, 2006 9:17 am) 3745 (Oct 06, 2006 10:55 am)
#3772 of 3823 Re: Smell of Burn Oil after Oil Change [sean74] by mr_bots Oct 03, 2006 (7:02 am)
Replying to: sean74 (Oct 02, 2006 7:19 pm) Oil just spilt on something either on the exhaust from letting the oil out, or somewhere on top of the engine from filling it back up. It'll all burn away. If you don't want to drive with it, just start it and let it idle in the driveway.
#3773 of 3823 Re: HVAC problems. [e2helper] by 3745 Oct 03, 2006 (7:31 am)
Replying to: e2helper (Oct 03, 2006 5:14 am) Looks like these might be what you are talking about. They are new to me as well. Most probably Delphi supplied them for the new Malibu. More electronics...........sigh......   http://www.delphi.com/manufacturers/other/micro/cmos/qpcd/ Replies to this message: e2helper (Oct 03, 2006 9:17 am) 3745 (Oct 06, 2006 10:55 am)
#3775 of 3823 Re: HVAC problems. [3745] by e2helper Oct 03, 2006 (9:17 am)
Replying to: 3745 (Oct 03, 2006 7:31 am) I found same link   You are correct. Delphi makes all the components for system Replies to this message: 3745 (Oct 06, 2006 10:55 am)
#3776 of 3823 2000 Malibu Tapping noise by phatmatttrip60 Oct 04, 2006 (6:52 am)
I drive a 2000 malibu Ls and after i start it up the engine makes a tapping noise for about five minutes or until it warms up... is it bad or normal Replies to this message: Mr_Shiftright (Oct 04, 2006 7:33 am)
#3777 of 3823 Re: 2000 Malibu Tapping noise [phatmatttrip60] by Mr_Shiftright HOST Oct 04, 2006 (7:33 am)
Replying to: phatmatttrip60 (Oct 04, 2006 6:52 am) Might not be "bad" but it's worth paying attention to. If this is lifter noise, then your valve lifters are either very dirty and not "bleeding" properly---they are like little plungers in a bore/ or your lifters are sticky with dirt and varnish.   You might try more frequent oil changes and a cleaning additive into the oil that allegedly cleans "sticky lifters".
#3778 of 3823 mrshiftright by gonogo Oct 04, 2006 (7:49 am)
What do you think of having a Malibu thread and a Classic thread, other sites are doing this to avoid some confusion. Replies to this message: Mr_Shiftright (Oct 04, 2006 7:56 am)

Messages Page 378 of 383 1 ... 375 376 377 378 379 380 381 ... 383 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Sedans Chevrolet Malibu Chevrolet Malibu: Problems & Solutions