You are here:
Forums
Pickups
Nissan Frontier
Nissan Frontier 2005+

2050 messages, Last post on Nov 14, 2009 at 2:42 PM
You are in the Nissan Frontier Forum. Your Host is kcram
|
Replying to: shuffles (Apr 19, 2007 10:09 am)
|
|
|
|
|
Replying to: driver56 (Apr 07, 2007 3:02 pm) |
|
|
|
|
Replying to: driver56 (Apr 19, 2007 3:53 pm)
|
|
|
Replying to: stringbender (Apr 21, 2007 7:11 pm) |
|
|
Replying to: driver56 (Apr 19, 2007 3:53 pm) http://www.edmunds.com/advice/fueleconomy/articles/116961/article.html Honda's Breakthrough Heats Up the Race for Clean Diesel Vehicles By Dave Chameides Date Posted 09-28-2006 Honda Motors unveiled its latest development in diesel technology on September 25, putting the carmaker well ahead of the pack in the race to bring clean diesel vehicles to market. Its next-generation diesel engine uses a catalytic converter requiring no additives of any kind and will run cleaner through its new design. Starting in January 2007, all diesel passenger vehicles sold in the United States will be required to meet the same Environmental Protection Agency Tier II Bin 5 emission standards governing all gasoline vehicles. This will require auto manufacturers to significantly reduce the particulate matter (PM) and nitrogen oxide (NOx) that escape their car's tailpipes. While particulate traps will significantly reduce PM, most manufacturers of diesel engines are still struggling with a way to clean up their NOx emissions. Until now, most car companies have been working on systems that utilize chemical urea. When sprayed into the hot exhaust of the engine, it creates ammonia. The ammonia then reacts with the NOx and converts it to inert nitrogen. What sets Honda's new technology apart is that its catalytic converter requires no outside chemicals whatsoever. As the exhaust hits the first layer of the unit, a small amount of NOx is converted to ammonia, which is then absorbed by a second layer. The second layer, now ammonia rich, then reacts with the remaining NOx and spits it out as harmless nitrogen. Honda spokesman Chris Martin points out that what makes the system better is that the ammonia is generated internally rather than being introduced as an added chemical. "It's maintenance proof," he said, adding that with urea-based systems, a car owner could either fall behind on maintenance or opt to save money by not replacing the chemical. "It might run just as well, but it would be much dirtier." With Honda's new technology in place, the car does everything for you; nothing extra to add, nothing to check and nothing to maintain. This should save the owner money, and Honda can rest assured that its diesel engines will continue to drive cleanly as long as they are on the road. Honda designed the converter for use in its 2.2 iCTDi diesel engine, which has garnered widespread attention since its debut in the current model European Accord. The engine, which is remarkably quiet, is also much cleaner than most diesels right out of the gate. Thanks to a redesigned combustion chamber, a reduction in fuel injection time and other efficiency improvements, the engine already emits significantly less NOx. Add on the new technology the converter affords, and clean diesel could be right around the corner. While European drivers may be seeing this technology sooner than we will, Honda estimates that their diesel vehicles will start hitting our shores in about three years. Couple this with their recent announcement concerning future diesel hybrid vehicles, and it looks as if Honda is pulling to the head of the clean diesel pack. |
|
|
|
|
I drive a 07 SE crew with the V6, the service mgr told me that to make sure and return to them for the oil change because they used some type of oil filter with some kind of special valve on it. He said the dry sound it makes during the first second or two would be worse and last longer if I did not use Nisann's special oil filter. Need input please as I am coming up on 2500 miles and sure hate to drive 30 miles to the dealer for a oil change. Thanx in advance, Steve
|
|
|
Replying to: stringbender (Apr 24, 2007 6:01 pm) |
|
|
Replying to: stringbender (Apr 24, 2007 6:01 pm)
|
|
|
Replying to: asa (Apr 28, 2007 4:15 am) |
|
|
2008 Nissan Frontier King Cab and Crew Cab The 2008 Nissan Frontier continues to offer tough, bold styling that mimics the larger Titan and an available Utility Bed system that features the Utili-track C-channel tie-down system and a factory-applied spray-in bedliner. Frontier continues to be built on Nissan’s F-Alpha platform and is available with a choice of a 2.5-liter inline 4-cylinder (4x2 only) or an advanced 4.0-liter DOHC V6, which produces 261 horsepower and 281 lb-ft of torque. The 2008 Frontier is offered in both King Cab and Crew Cab body styles and in 4x2 and 4x4 driveline configurations. Frontier also features long bed models with beds more than 13 inches longer than the standard models. Enhancements to the 2008 Frontier King Cab and Crew Cab include: - New SE trim for inline 4-cylinder models (previously only available as XE grade) - New Technology Package available for NISMO and LE trims - Utility Bed Package Standard on King Cab NISMO models - New finish on 16-inch NISMO Alloy Wheels - Available Bluetooth® Hands-free Phone System |
|
You are here:
Forums
Pickups
Nissan Frontier
Nissan Frontier 2005+
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Nissan Frontier



Browse by Board
Browse by Topic
Today's Chats