Sign In Join 



Got a Quick, Technical Question?

4963 messages,  Last post on Dec 04, 2009 at 5:02 AM

You are in the Maintenance & Repair Forum. Your Host is mr_shiftright

What is this discussion about? Brakes, Electrical, Engine, Exhaust

A Place to Post A Question That Doesn't Need a Discussion--Only One Quick Answer!


Messages Page 482 of 497
1
...
479
480
481
482
483
484
485
...
497
Prev
Next
Last
Go To Msg #
Search This Discussion

#4804 of 4963
Re: Turn signal problem - can you help me? [alternator] by kiawah
May 03, 2009 (1:26 pm)
Reply

Replying to: alternator (May 03, 2009 11:49 am)

Look closely at your bulbs, you could have a broken filament flopping around as you hit bumps.
#4805 of 4963
engine acts like its dieng when stopping by tommylee
May 04, 2009 (11:49 am)
Reply
i have a 1990 chevy k 2500 with a 350 v-8 with a automatic transmission when i apply brakes to slow down or to stop it acts like its diend then the idle smooths back to normal then when i pull into my driveway and right when im about to stop it dies what to do i dont know can you help? i have already replaced the throttle position sensor and the plugs and wires and the egr valve and th idle sensor and had the time set on it and replaced the map sensor and several vaccum lines i need some help please running out of options and money
#4806 of 4963
Re: Turn signal problem - can you help me? [kiawah] by alternator
May 04, 2009 (1:09 pm)
Reply

Replying to: kiawah (May 03, 2009 1:26 pm)

Bulbs work okay even while car is moving - in hazard mode.
 
Fuse blew again in turn signal mode.. Since turn signal and hazard circuits use the same flasher module and the same bulbs, I am thinking it must be a connection problem (intermittent short). There are too many wires running around inside the steering column for me to look there. Will take to dealer Wednesday.
#4807 of 4963
Re: engine acts like its dieng when stopping [tommylee] by qbrozen
May 04, 2009 (1:26 pm)
Reply

Replying to: tommylee (May 04, 2009 11:49 am)

Could be any number of things. Try this: when slowing down and it starts to act like its going to die, pop it into neutral. Does that allow the idle to come back to normal and prevent dieing? If so, could be a trans problem.
#4808 of 4963
Re: engine acts like its dieng when stopping [tommylee] by jipster
May 04, 2009 (6:01 pm)
Reply

Replying to: tommylee (May 04, 2009 11:49 am)

similar to when my mass airflow sensor was bad.
#4809 of 4963
Re: Turn signal problem - can you help me? [alternator] by euphonium
May 05, 2009 (8:53 am)
Reply

Replying to: alternator (May 04, 2009 1:09 pm)

Don't be surprised if the problem requires the replacement of the Turn Signal assembly which includes the WS wiper switch.
#4810 of 4963
Panic Alarm by speddy1
May 07, 2009 (10:18 am)
Reply
I own a 2004 C240 4Matic,53,000 miles.The panic alarm doesnt work when i hit panic on my key.The lights do flash on and off though.A friend said it may be the siren but wasnt sure.Any ideas?Also do the light sensors lose sensitivity.When its cloudy or a little dark out the headlights dont come on like they used too.They do come on when its dark (this is in the autolight mode).Is there an adjustment?
#4811 of 4963
Bogging down when going up hill and when hotter out. by cheri6
May 07, 2009 (3:28 pm)
Reply
Hi, I have a 93 mercury villager with 102,000 miles that seems to bog down when going uphill and sometimes on flat ground when it is warmer. It just loses power on a hill and cuts in and out as if it's gas is being cut off. I can step on it when it is doing this and eventually it might take off faster and other times it just loses its power. Then when I let off the gas for a second while it is doing this, it will pick up again and surge forward. It feels like a real uneven flow of gas is getting through. We just changed the fuel pump so it isn't that. I read about the same problem with the villagers but I don't ever hear what the problem is. Does anyone know anything about this. Thank you.
#4812 of 4963
Re: Bogging down when going up hill and when hotter out. [cheri6] by euphonium
May 07, 2009 (8:27 pm)
Reply

Replying to: cheri6 (May 07, 2009 3:28 pm)

Mass air flow sensor should be looked at besides a set of plugs and wires.
#4813 of 4963
press request by kirstie_h HOST
May 08, 2009 (5:58 pm)
Reply
A reporter is looking to talk with a driver who brought a vehicle in for service and the shop tried to upsell them. Maybe you came in for a scheduled maintenance visit and the service advisor tried to sell you a new set of brakes or a transmission flush.
If you have a story to share, please respond to jfallonedmunds.com by Friday, May 15, 2009 with a few details and your city and state of residence.
Thanks,
Jeannine Fallon
Corporate Communications
Edmunds.com

Messages Page 482 of 497
1
...
479
480
481
482
483
484
485
...
497
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement