You are here:
Forums
Hatchbacks
MINI Cooper
MINI Cooper Accessories & Modifications

51 messages, Last post on Nov 28, 2009 at 8:35 AM
You are in the MINI Cooper Forum. Your Host is pf_flyer
|
Replying to: austincoopers (Nov 04, 2007 1:22 pm) had to take out all the roof lining and change rusted out wiring and electrical connectors. according to bmw dealer technician - he blurted out that: all bmw's with sunroofs have the potential to have this problem. over time, all the rubber seals and joints shrink and thus start to come apart or come loose which allows water, wind etc to creep in. there are tubes running down the A pillars, from the sunroof, in order to exhaust excess water. if the rubber seals of the sunroof shrink and lets water in and subsequently, the components joining these tubes come apart - guess what - there is water in the car. my car has little wear and tear. if this happens to a car like this - then what happens to a car with 120k km on it; the average for a car of this age?? i was under the impression that bmw's had great quality in materials, workmanship etc. not so sure about that anymore. cooper s , new, loaded still runs about 45k in canada. not a cheap second car i'd say. i'd recommend prospective used car buyer to drench car in a drive through car wash and / or manual power wash and test if there is a water puddle on the floor: both passenger and driver's side. if so, discount the car by C$ equivalent 2800 for sure to get it fixed. |
|
| I have a 2002 MCS with the Borla Catback Exhaust system. Recenty, I discovered that the after market exhaust intake boot had a tear in it and the tech suggested putting the factory box back over the intake, which he did. Does anyone know how this affects hp, if any or how it affects anything? Obviously, I don't. I guess my main concern is, with the Borla system, do I need some other type of Intake Boot besides the factory one? Thanks for your input. | |
| I have a 2002 MCS with the Borla Catback Exhaust system. Recenty, I discovered that the after market exhaust intake boot had a tear in it and the tech suggested putting the factory box back over the intake, which he did. Does anyone know how this affects hp, if any or how it affects anything? Obviously, I don't. I guess my main concern is, with the Borla system, do I need some other type of Intake Boot besides the factory one? Thanks for your input. | |
| my 2009 Mini John Cooper Works has a rear view mirror that is SO HUGE it partially blocks vision forward....it contains the remote door lock electronics ......any suggestions for a source for a smaller mirror ? | |
You are here:
Forums
Hatchbacks
MINI Cooper
MINI Cooper Accessories & Modifications
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 MINI Cooper



Browse by Board
Browse by Topic
Today's Chats