Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Mitsubishi Endeavor Mitsubishi Endeavor Maintenance and Repair
401 messages, Last post on Sep 25, 2009 at 9:17 AM
You are in the Mitsubishi Endeavor Forum. Your Hosts are steve_ & tidester
|
Replying to: kidder (Feb 10, 2008 8:45 am) Clayton |
|
I have a 2004 Endeavor XLS and for the life of me I cannotkeep the glove box door from squeeking. Open the glove box door and it quits, big deal. I have tried stick on pads in inconspicuous places, but no help. Anybody had this problem?
|
|
|
|
|
Replying to: cfrench (Feb 28, 2008 7:17 am)
|
|
|
Replying to: mikevegas06 (Mar 01, 2008 4:41 am)
|
|
|
|
|
Replying to: cweiss (Mar 05, 2007 5:12 pm) A guy posted photos re how to do it there, take off the front then assemble them back. I spent about 45 mins to complete the job |
|
|
|
|
Replying to: cfrench (Mar 05, 2008 10:37 am) |
|
|
Replying to: cfrench (Mar 05, 2008 10:37 am) I'm not sure if this is a new thread, but you said you removed the glove box, so I'll ask you first. I'm trying to get the glove box out to replace the cabin filter. I removed the four screws in the diagram of the glove box, but the picture shows 'hook crochets' (three on rt, two on left) which are what must be holding the plastic in place, because I can't budge it. How did you remove the glove box?
|
|
| I have a 2004 Endeavor and am trying to replace the cabin air filter. The schematic I got shows dropping the glove box door to remove the four screws, which I've been able to do. But that's where I'm stuck. The diagram also shows 'hook crochets' which must be what's holding the plastice in place (2 on left, 3 on rt), but I can't figure out how to release them. I don't want to damage anything. Anyone done this and can tell me how to proceed? | |
|
Replying to: ccarl1 (Mar 24, 2008 4:48 pm) Clayton
|
|
|
Replying to: cfrench (Mar 25, 2008 6:02 am) Thank you so much. Last night my husband and I were trying to do it, but got to that step and were at a loss for what to do. So, he put it back together and said he was just going to take it in and try to return the filter. (I think he said he paid $30. What do you mean "in this forum you can get...." We could order parts here? But there'd be shipping, right? So, $30 is probably okay. Or, I could get it here and return the other, if there's no shipping and save another $7.) Last night, I said I'd see what I could find on the internet. I found and signed up for this forum (my first), but wasn't very hopeful after hours of working at it. Then I got your answer!!! I tried what you said and got it apart. There hadn't been a filter in it, so I had to cut out the cut out....a bit scary, chopping into the car, but I wanted to surprise him. All I could hear in the back of my head as I was doing it (thinking that I might be doing something wrong) was, "I told you we should've taken it in!" But, it's in now and back together, thanks to you. And I'm feeling very courageous and accomplished (It takes so little, LOL). Let me know about the ordering parts "in the forum", so we can get the next one through here, when it's needed. Of course, if I have a question in the future, it will be much easier as I am now a member of this great group! And THANKS again! Carly
|
|
You are here:
Forums
SUVs Mitsubishi Endeavor Mitsubishi Endeavor Maintenance and Repair
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Mitsubishi Endeavor
Browse by Board
Browse by Topic
Today's Chats
