- #287 of 408
-
Re: Help- Timing Belt Issue [avery1226]
by applewins
-
Sep 03, 2007 (5:23 pm)
-
|
|
Replying to: avery1226 (Jul 15, 2007 6:22 am)
Mike, did you come to any resolve with Mitsubishi on this issue. We just purchased a used 2006 with 32,000 miles so I'm a little concerned. The car seems like it's in excellent shape. Did the 30,000 mile checkup my self and saved a ton of money.
|
- #288 of 408
-
Re: Shifting issues. [hellcat51]
by applewins
-
Sep 03, 2007 (5:30 pm)
-
|
|
Replying to: hellcat51 (Aug 31, 2007 8:23 am)
My transmission shifting is smooth. How many miles on your Endeavor? Checked transmission oil level? Need to change the tranny oil?
|
- #289 of 408
-
Re: Shifting issues. [applewins]
by hellcat51
-
Sep 04, 2007 (4:49 am)
-
|
|
Replying to: applewins (Sep 03, 2007 5:30 pm)
It's a 2004 with 20,000 miles on it. The dealer checked it out twice and can't find anything wrong with it but says they feel what I'm talking about. I have noticed as of late that it seems to be hunting for its correct gear between 20 and 35 MPH. Hard to explain but I'll try. When I let up off the gas it sometimes makes a clunk as it downshifts and other times it seems to float as though it can't decide whether to downshift or not. Does that make sense? Also, once it warms up, if I put my foot on the brake and shift from R to D to R, etc. repeatedly I hear the clunk noise from the back end somewhere. Any ideas? Might be time to take it to a transmission shop. Thanks. Nick.
|
- #290 of 408
-
Re: Shifting issues. [hellcat51]
by mikevegas06
-
Sep 04, 2007 (5:42 pm)
-
|
|
Replying to: hellcat51 (Sep 04, 2007 4:49 am)
"clunk noise from the back end somewhere..." So yours is AWD? If yes, it certaintly sounds like the fluid for the rear differential is low. I think your idea about stopping by a transmission shop is on target. They can proably tell you what's up even before driving it based on the amount of detail you've provided. Then maybe you can head to your Mitsu dealer and have them repair it (assuming it's still under warranty). Good luck and keep us posted.
|
- #291 of 408
-
bank 1 bank 2 ?
by gerg
-
Sep 10, 2007 (2:34 pm)
-
|
|
Need to know which is bank 2 on a endeavor with a V6.I have an OBD code P0431.
|
- #292 of 408
-
Re: AC drain [gerg]
by alron
-
Oct 27, 2007 (8:21 pm)
-
|
|
Replying to: gerg (Jun 23, 2006 9:55 am)
I'm having the same problem. It seems like a design flaw
|
- #293 of 408
-
Re: Shifting issues. [hellcat51]
by daisy58
-
Nov 01, 2007 (12:29 pm)
-
|
|
Replying to: hellcat51 (Aug 31, 2007 8:23 am)
I am having shifting issues with my endeavor... the trani is not shifting smoothly at all! No one that I have had look at it can tell me what, or why. Can anyone tell me anything? 
|
- #294 of 408
-
Driveshaft/Propeller shaft question
by hellcat51
-
Nov 02, 2007 (4:21 am)
-
|
|
I have seen a number of posts regarding replacement of driveshafts and propeller shafts. Where are these located and do they affect shifting? That is, does the vehicle shift smoothly or not. Thanks. Trying to isolate where the problem lies with my 04.
|
- #295 of 408
-
Re: Shifting issues. [daisy58]
by hellcat51
-
Nov 02, 2007 (4:25 am)
-
|
|
Replying to: daisy58 (Nov 01, 2007 12:29 pm)
I am having the exact same problem! Dealer said twice they couldn't find any problem with it. I am now going to transmission place and have them check it out. What are your symptoms? BTW, I have an 04 with 21K miles.
|
- #296 of 408
-
Re: Driveshaft/Propeller shaft question [hellcat51]
by daisy58
-
Nov 02, 2007 (3:08 pm)
-
|
|
Replying to: hellcat51 (Nov 02, 2007 4:21 am)
All I know is that my car is not shifting smoothly, especially when shifting from drive to reverse and vis-versa. It gives kinda a hard jerk when going into gear. BTW I have an 04 as well but I have 80,000 miles on mine. I've check fluid and it's full. Still not sure what to do>
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs 
